AutoCodes – Nissan – P0453 2010 Nissan Rogue

P0453 2010 Nissan Rogue Code - EVAP Control System Pressure Sensor High Input

Quick Answer

The Evaporative Emission System (EVAP) control system pressure sensor detects pressure in the purge line. Common causes include Faulty Evaporative Emission System (EVAP) Pressure sensor, Evaporative Emission System (EVAP) Pressure sensor harness is open or shorted, Evaporative Emission System (EVAP) Pressure sensor circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0453 2010 Nissan Rogue indicates EVAP Control System Pressure Sensor High Input.
Common causes: Common causes include Faulty Evaporative Emission System (EVAP) Pressure sensor, Evaporative Emission System (EVAP) Pressure sensor harness is open or shorted, Evaporative Emission System (EVAP) Pressure sensor circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,026

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0453 2010 Nissan Rogue Description

The Evaporative Emission System (EVAP) control system pressure sensor detects pressure in the purge line. The sensor output voltage to the Engine Control Module (ECM) increases as pressure increases. The EVAP control system pressure sensor is not used to control the engine system. It is used only for on board diagnosis.

OBDII Code P0453 2010 Nissan Rogue - EVAP Control System Pressure Sensor High Input - AutoCodes.com — P0453 2010 Nissan Rogue Code - EVAP Control System Pressure Sensor High Input

What does this mean?

What are the Possible Causes of the DTC P0453 2010 Nissan Rogue?

Faulty Evaporative Emission System (EVAP) Pressure sensor
Evaporative Emission System (EVAP) Pressure sensor harness is open or shorted
Evaporative Emission System (EVAP) Pressure sensor circuit poor electrical connection
Refrigerant pressure sensor
EVAP canister vent control valve
EVAP canister
Rubber hose from EVAP canister vent control valve

How to Fix the DTC P0453 2010 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0453 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0453 2010 Nissan Rogue code?

Need more information on how to fix the P0453 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0453 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0453 2010 Nissan Rogue Code

What does the OBDII code P0453 mean for a 2010 Nissan Rogue?

The P0453 code indicates that the EVAP (Evaporative Emission Control) system pressure sensor is sending a high input signal to the engine control module, suggesting a potential issue with the sensor or the EVAP system.

What are the common symptoms of P0453 in a Nissan Rogue?

Common symptoms include the check engine light being illuminated, difficulty starting the engine, poor fuel economy, and potential fuel odor due to EVAP system leaks.

What can cause the P0453 code to trigger?

Causes can include a faulty EVAP pressure sensor, damaged wiring or connectors, a malfunctioning fuel cap, or issues with the EVAP system itself, such as leaks or blockages.

How can I diagnose the P0453 code?

Start by using an OBDII scanner to confirm the code. Inspect the EVAP pressure sensor and its wiring for damage. Check the fuel cap for proper sealing and examine the EVAP system for any leaks or blockages.

What repairs can be done to fix the P0453 code?

Repairs may include replacing the EVAP pressure sensor, repairing damaged wiring or connectors, replacing a faulty fuel cap, or fixing any leaks found in the EVAP system.

Is it safe to drive with the P0453 code?

While it is generally possible to drive the vehicle with this code, it is advisable to address the issue promptly to avoid further damage to the EVAP system and to maintain proper emissions control.

Can I clear the P0453 code and see if it returns?

Yes, you can clear the code using an OBDII scanner, but if the underlying issue is not resolved, the code will likely return after a short period of driving.

Will replacing the EVAP pressure sensor always fix the P0453 code?

Not necessarily. While replacing the sensor can resolve the issue, itâ€™s important to ensure that there are no other underlying problems in the EVAP system or wiring that could cause the code to persist.

How much does it typically cost to repair the P0453 code?

Repair costs can vary widely based on the exact issue, but replacing the EVAP pressure sensor can range from $100 to $300, depending on labor rates and parts prices in your area.