AutoCodesNissan – P0451 2012 Nissan Sentra

P0451 2012 Nissan Sentra Code - EVAP Control System Pressure Sensor Performance

Quick Answer

The Evaporative Emission System (EVAP) control system pressure sensor detects pressure in the purge line. Common causes include Faulty Evaporative Emission System (EVAP) Pressure Sensor, Evaporative Emission System (EVAP) Pressure sensor harness is open or shorted, Evaporative Emission System (EVAP) Pressure sensor circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0451 2012 Nissan Sentra indicates EVAP Control System Pressure Sensor Performance.
Common causes
Common causes include Faulty Evaporative Emission System (EVAP) Pressure Sensor, Evaporative Emission System (EVAP) Pressure sensor harness is open or shorted, Evaporative Emission System (EVAP) Pressure sensor circuit poor electrical connection.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,459
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0451 2012 Nissan Sentra Description

The Evaporative Emission System (EVAP) control system pressure sensor detects pressure in the purge line. The sensor output voltage to the Engine Control Module (ECM) increases as pressure increases. The EVAP control system pressure sensor is not used to control the engine system. It is used only for on board diagnosis.
OBDII Code P0451 2012 Nissan Sentra - EVAP Control System Pressure Sensor Performance - AutoCodes.com
P0451 2012 Nissan Sentra Code - EVAP Control System Pressure Sensor Performance

What are the Possible Causes of the DTC P0451 2012 Nissan Sentra?

  • Faulty Evaporative Emission System (EVAP) Pressure Sensor
  • Evaporative Emission System (EVAP) Pressure sensor harness is open or shorted
  • Evaporative Emission System (EVAP) Pressure sensor circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0451 2012 Nissan Sentra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0451 2012 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0451 2012 Nissan Sentra code?

Need more information on how to fix the P0451 2012 Nissan Sentra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0451 2012 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0451 2012 Nissan Sentra Code

What does the OBDII code P0451 mean for a 2012 Nissan Sentra?

The OBDII code P0451 indicates a problem with the EVAP (Evaporative Emission Control System) pressure sensor performance, suggesting that the sensor is not functioning correctly.

What are the common symptoms associated with code P0451?

Common symptoms include the check engine light being illuminated, potential fuel smell, reduced fuel efficiency, and in some cases, rough idling.

What could cause the P0451 code to trigger in my 2012 Nissan Sentra?

Causes may include a faulty EVAP pressure sensor, damaged vacuum lines, leaks in the EVAP system, or issues with the engine control module (ECM).

How can I diagnose the P0451 code effectively?

To diagnose, you can start by checking the EVAP pressure sensor and its wiring for damage, inspect for vacuum leaks, and use a scan tool to verify the sensor readings against expected values.

What is the most common repair for a P0451 code?

The most common repair is replacing the faulty EVAP pressure sensor. However, addressing any underlying vacuum leaks or damaged hoses may also be necessary.

Can I drive my 2012 Nissan Sentra with the P0451 code?

While you can drive the vehicle, it’s advisable to address the issue promptly, as it may lead to increased emissions and possible damage to other components.

How much does it typically cost to fix the P0451 code?

Repair costs can vary widely, but replacing the EVAP pressure sensor generally ranges from $100 to $300, depending on labor rates and part prices.

Will clearing the P0451 code fix the problem?

Clearing the code may temporarily turn off the check engine light, but if the underlying issue is not fixed, the code will likely reappear.

Is it necessary to perform additional tests after fixing the P0451 code?

Yes, it is important to perform additional tests to ensure that the repair was successful and that there are no further issues within the EVAP system.

Discuss the causes and fixes for P0451 2012 Nissan Sentra OBDII Code

Code P0451 2012 Nissan Sentra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play