P0448 2013 Nissan Rogue Code - Evaporative Emission Control System Vent Control Circuit Close
Quick Answer
The Evaporative Emission System (EVAP) canister vent control valve is located on the EVAP canister and is used to seal the canister vent. Common causes include Faulty canister vent control valve, Purge Control Valve harness is open or shorted, Purge Control Valve electrical circuit poor connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0448 2013 Nissan Rogue indicates Evaporative Emission Control System Vent Control Circuit Close.
- Common causes
- Common causes include Faulty canister vent control valve, Purge Control Valve harness is open or shorted, Purge Control Valve electrical circuit poor connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0448 2013 Nissan Rogue Description
A plunger will then move to seal the canister vent. The ability to seal the vent is necessary for the on board diagnosis of other evaporative emission control system componentsThis solenoid valve is used only for diagnosis, and usually remains opened. When the vent is closed, under normal purge conditions, the evaporative emission control system is depressurized and allows EVAP Control System (Small Leak) diagnosis.
What are the Possible Causes of the DTC P0448 2013 Nissan Rogue?
- Faulty canister vent control valve
- Purge Control Valve harness is open or shorted
- Purge Control Valve electrical circuit poor connection
How to Fix the DTC P0448 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
There is a factory Nissan service bulletin to help diagnose the P0448 code:
Nissan Factory Service Bulletin OBDII Code P0448
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0448 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0448 2013 Nissan Rogue code?
Need more information on how to fix the P0448 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0448 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0448 2013 Nissan Rogue Code
1. What are common symptoms of OBDII code P0448 in a 2013 Nissan Rogue?
- Common symptoms include the check engine light coming on, rough idling, decreased fuel efficiency, and the smell of fuel.
2. What does the OBDII code P0448 on a 2013 Nissan Rogue indicate?
- OBDII code P0448 indicates a problem with the Evaporative Emission Control System Vent Control Circuit.
3. What are the possible causes of OBDII code P0448 in a 2013 Nissan Rogue?
- Possible causes include a faulty vent control valve, damaged wiring or connectors, a clogged vent control valve, or a malfunctioning evaporative emission canister.
4. How can I diagnose the cause of OBDII code P0448 in my 2013 Nissan Rogue?
- Diagnosing the issue may involve checking the vent control valve for proper operation, inspecting wiring for damage, and testing the evaporative emission system components.
5. Can I drive my 2013 Nissan Rogue with OBDII code P0448?
- It is generally safe to drive the vehicle with this code, but it is recommended to address the issue promptly to prevent potential damage to the emission control system.
6. How can I repair OBDII code P0448 in my 2013 Nissan Rogue?
- Repair may involve replacing the vent control valve, repairing damaged wiring or connectors, clearing any blockages in the system, or replacing the evaporative emission canister.
7. Is it possible to reset OBDII code P0448 in a 2013 Nissan Rogue without fixing the underlying issue?
- Resetting the code without addressing the root cause is not recommended, as the issue will likely trigger the code to reappear once the vehicle's self-diagnostic system detects the problem again.
8. Can a DIY enthusiast fix OBDII code P0448 in a 2013 Nissan Rogue?
- Some simple repairs, such as checking and cleaning connections, can be done by a DIY enthusiast, but complex issues like replacing components may require professional assistance.
9. How much does it cost to repair OBDII code P0448 in a 2013 Nissan Rogue?
- The cost of repair can vary depending on the specific issue causing the code, the labor rates in your area, and whether you choose to fix the problem yourself or seek assistance from a mechanic.
10. Are there any maintenance tips to prevent OBDII code P0448 from appearing in a 2013 Nissan Rogue?
- Regularly inspecting and maintaining the evaporative emission control system components, such as the vent control valve and canister, can help prevent issues that may trigger OBDII code P0448.
Discuss the causes and fixes for P0448 2013 Nissan Rogue OBDII Code
Code P0448 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
