P0443 Mercury Code - EVAP Purge Control Circuit
Quick Answer
The Evaporative Emission System (EVAP) canister purge volume control solenoid valve uses a ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0443 Mercury indicates EVAP Purge Control Circuit .
- Common causes
- Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0443 Mercury Description
What are the Possible Causes of the DTC P0443 Mercury?
- Faulty Evaporative Emission (EVAP) Purge Solenoid Control
- Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted
- Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection
How to Fix the DTC P0443 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0443 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0443 Mercury code?
Need more information on how to fix the P0443 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0443 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0443 Mercury Code
What does the OBDII code P0443 mean for my Mercury vehicle?
The P0443 code indicates an issue with the EVAP purge control circuit, which is responsible for managing the flow of fuel vapors from the charcoal canister to the engine.
What are the common symptoms of the P0443 code?
Common symptoms include the check engine light being illuminated, poor fuel economy, rough idling, and difficulty starting the engine.
What could cause the P0443 code to trigger?
Potential causes include a faulty EVAP purge valve, damaged wiring or connectors in the purge control circuit, a clogged charcoal canister, or a malfunctioning engine control module (ECM).
How can I diagnose the P0443 code?
To diagnose the P0443 code, inspect the EVAP purge valve and its wiring for damage, test the valve for proper operation, and check for any other related trouble codes that may be present.
What are some common repair tips for fixing the P0443 code?
Common repairs include replacing a faulty EVAP purge valve, repairing damaged wiring or connectors, and ensuring all connections are secure and free from corrosion.
Can I drive my Mercury with the P0443 code?
While it may be possible to drive with the P0443 code, it is advisable to address the issue promptly to avoid potential engine performance problems and increased emissions.
Will clearing the P0443 code fix the issue permanently?
Clearing the code will only reset the check engine light; if the underlying issue is not resolved, the code will likely reappear after some time or after driving the vehicle.
How much does it typically cost to repair the P0443 code?
Repair costs can vary widely depending on the specific issue, ranging from $100 to $500, depending on whether it involves simple repairs or replacement of parts like the EVAP purge valve.
Can the P0443 code affect my vehicle's emissions testing?
Yes, the P0443 code can cause your vehicle to fail emissions testing due to improper operation of the EVAP system, leading to increased emissions.
Discuss the causes and fixes for P0443 Mercury OBDII Code
Code P0443 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
