P0443 Chrysler Code - EVAP Purge Control Circuit
Quick Answer
The Evaporative Emission System (EVAP) canister purge volume control solenoid valve uses an ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission Purge Solenoid Control harness is open or shorted, Evaporative Emission Purge Solenoid Control circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0443 Chrysler indicates EVAP Purge Control Circuit .
- Common causes
- Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission Purge Solenoid Control harness is open or shorted, Evaporative Emission Purge Solenoid Control circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0443 Chrysler Description
What are the Possible Causes of the DTC P0443 Chrysler?
- Faulty Evaporative Emission (EVAP) Purge Solenoid Control
- Evaporative Emission Purge Solenoid Control harness is open or shorted
- Evaporative Emission Purge Solenoid Control circuit poor electrical connection
How to Fix the DTC P0443 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0443 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0443 Chrysler code?
Need more information on how to fix the P0443 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0443 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0443 Chrysler Code
No Frequently Asked Questions about P0443 Chrysler Code found.
Discuss the causes and fixes for P0443 Chrysler OBDII Code
-
at what time is a duty cycle signal sent from the pcm? ive replaced the valve assy .,wring harness , and the pcm and still show a P0443 CODE......
-
Usually the PCM send the signal to the valve when the engine is warm up and during cruising driving conditions (normal engine load, no hard acceleration or dis acceleration). If the codes comes back, check the hoses from the evap canister to the valve and the valve to the engine.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
