P0443 2015 GMC Sierra Code - Evaporative Emission Purge Solenoid Valve Control Circuit
Quick Answer
The Evaporative Emission (EVAP) Purge Solenoid Valve is used to purge fuel vapor from the EVAP canister to the intake manifold. Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Valve, Evaporative Emission Purge Solenoid Valve harness is open or shorted, Evaporative Emission Purge Solenoid Valve circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0443 2015 GMC Sierra indicates Evaporative Emission Purge Solenoid Valve Control Circuit.
- Common causes
- Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Valve, Evaporative Emission Purge Solenoid Valve harness is open or shorted, Evaporative Emission Purge Solenoid Valve circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0443 2015 GMC Sierra Description
What are the Possible Causes of the DTC P0443 2015 GMC Sierra?
- Faulty Evaporative Emission (EVAP) Purge Solenoid Valve
- Evaporative Emission Purge Solenoid Valve harness is open or shorted
- Evaporative Emission Purge Solenoid Valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0443 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0443 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0443 2015 GMC Sierra code?
Need more information on how to fix the P0443 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0443 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0443 2015 GMC Sierra Code
1. What does the OBDII code P0443 mean on a 2015 GMC Sierra?
P0443 indicates a malfunction in the Evaporative Emission (EVAP) Purge Solenoid Valve Control Circuit, which is responsible for regulating fuel vapors sent to the engine for combustion.
2. What are the common symptoms of code P0443 in a 2015 GMC Sierra?
Symptoms may include a Check Engine Light, reduced fuel efficiency, rough idling, difficulty starting the engine, or a noticeable fuel odor.
3. What causes the P0443 code on a 2015 GMC Sierra?
Common causes include a faulty EVAP purge solenoid valve, damaged or corroded wiring, a poor electrical connection, or a failed powertrain control module (PCM).
4. Can I drive my 2015 GMC Sierra with a P0443 code?
While the vehicle may still be drivable, it’s not recommended to ignore this code, as it can lead to increased emissions, reduced fuel efficiency, and potential long-term engine damage.
5. How do I fix the P0443 code on a 2015 GMC Sierra?
Repairs may involve replacing the EVAP purge solenoid valve, repairing or replacing damaged wiring, cleaning corroded electrical connections, or reprogramming the PCM if necessary.
6. How can I test the EVAP purge solenoid valve on my 2015 GMC Sierra?
You can test the solenoid by applying a 12V power source to it and listening for a clicking sound, which indicates proper functionality. If it doesn’t click, the valve is likely faulty.
7. Where is the EVAP purge solenoid valve located on a 2015 GMC Sierra?
The EVAP purge solenoid valve is typically located near the intake manifold or on the engine bay, depending on the specific engine configuration.
8. What tools are needed to diagnose a P0443 code on a 2015 GMC Sierra?
You’ll need an OBDII scanner, a multimeter to test electrical connections, and possibly a 12V power source for testing the solenoid valve.
9. How much does it cost to repair a P0443 issue on a 2015 GMC Sierra?
Repair costs can range from $50 to $200, depending on whether you need to replace the EVAP purge solenoid valve or repair wiring issues.
10. Can a P0443 code be caused by a bad gas cap on a 2015 GMC Sierra?
No, a bad gas cap is unlikely to cause a P0443 code. It is more commonly associated with other EVAP system codes like P0455 or P0442.
Discuss the causes and fixes for P0443 2015 GMC Sierra OBDII Code
Code P0443 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
