AutoCodes – Nissan – P0443 2010 Nissan Rogue

P0443 2010 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve

Quick Answer

This system controls the flow rate of fuel vapor from the EVAP canister. Common causes include Faulty EVAP Canister Purge Volume Control Solenoid Valve, EVAP Canister Purge Volume Control Solenoid Valve harness is open or shorted, EVAP Canister Purge Volume Control Solenoid Valve circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0443 2010 Nissan Rogue indicates EVAP Canister Purge Volume Control Solenoid Valve.
Common causes: Common causes include Faulty EVAP Canister Purge Volume Control Solenoid Valve, EVAP Canister Purge Volume Control Solenoid Valve harness is open or shorted, EVAP Canister Purge Volume Control Solenoid Valve circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,222

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 28, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0443 2010 Nissan Rogue Description

This system controls the flow rate of fuel vapor from the EVAP canister. The opening of the vapor by-pass passage in the EVAP canister purge volume control solenoid valve changes to control the flow rate. The EVAP canister purge volume control solenoid valve repeats ON/OFF operation according to the signal sent from the Engine Control Module (ECM). The opening of the valve varies for optimum engine control. The optimum value stored in the ECM is determined by considering various engine conditions. When the engine is operating, the flow rate of fuel vapor from the EVAP canister is regulated as the airflow changes.
The EVAP canister purge volume control solenoid valve uses an ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the ECM. The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.
The Diagnostic Trouble Code (DTC) will set when the canister purge flow is detected during the specified driving conditions, even when the EVAP canister purge volume control solenoid valve is completely closed.

OBDII Code P0443 2010 Nissan Rogue - EVAP Canister Purge Volume Control Solenoid Valve - AutoCodes.com — P0443 2010 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve

What does this mean?

What are the Possible Causes of the DTC P0443 2010 Nissan Rogue?

Faulty EVAP Canister Purge Volume Control Solenoid Valve
EVAP Canister Purge Volume Control Solenoid Valve harness is open or shorted
EVAP Canister Purge Volume Control Solenoid Valve circuit poor electrical connection
Faulty EVAP Control System Pressure Sensor

How to Fix the DTC P0443 2010 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

It's a very common problem with Nissan vehicles. If the harness is not damaged, it's very likely that the problem is the canister purge volume control solenoid valve.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0443 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0443 2010 Nissan Rogue code?

Need more information on how to fix the P0443 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0443 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0443 2010 Nissan Rogue Code

1. What does OBDII code P0443 on a 2010 Nissan Rogue indicate?

The OBDII code P0443 on a 2010 Nissan Rogue points to a problem with the EVAP Canister Purge Volume Control Solenoid Valve.

2. What are the common symptoms of a P0443 code in a 2010 Nissan Rogue?

Common symptoms of a P0443 code in a 2010 Nissan Rogue may include rough idling, decreased fuel efficiency, and the illumination of the check engine light.

3. What are the potential causes of a P0443 code on a 2010 Nissan Rogue?

Common causes of a P0443 code on a 2010 Nissan Rogue include a faulty EVAP Canister Purge Volume Control Solenoid Valve, damaged wiring or connectors, or a malfunctioning ECM.

4. How can I diagnose a P0443 code on my 2010 Nissan Rogue?

To diagnose a P0443 code on a 2010 Nissan Rogue, you can use an OBDII scanner to retrieve the specific code and then inspect the EVAP system components for any visible damage or issues.

5. Can I continue driving my 2010 Nissan Rogue with a P0443 code?

While it may be possible to drive your 2010 Nissan Rogue with a P0443 code, it is recommended to address the issue promptly to prevent potential damage to other components and ensure optimal performance.

6. How can I repair a P0443 code on my 2010 Nissan Rogue?

To repair a P0443 code on a 2010 Nissan Rogue, you may need to replace the EVAP Canister Purge Volume Control Solenoid Valve, repair any damaged wiring or connectors, or reset the ECM after addressing the underlying issue.

7. Are there any DIY tips for fixing a P0443 code on a 2010 Nissan Rogue?

If you have experience with automotive repairs, you may attempt to replace the EVAP Canister Purge Volume Control Solenoid Valve yourself following manufacturer guidelines and using the appropriate tools.

8. How much does it typically cost to repair a P0443 code on a 2010 Nissan Rogue?

The cost of repairing a P0443 code on a 2010 Nissan Rogue can vary depending on the specific issue, the labor rates in your area, and whether you choose to repair the vehicle yourself or take it to a professional mechanic.

9. Can a P0443 code on a 2010 Nissan Rogue cause other problems if left unaddressed?

If left unaddressed, a P0443 code on a 2010 Nissan Rogue can lead to reduced fuel efficiency, potential damage to other emission control components, and may cause the vehicle to fail emissions tests.

10. How long does it take to repair a P0443 code on a 2010 Nissan Rogue?

The time needed to repair a P0443 code on a 2010 Nissan Rogue can vary depending on the extent of the issue and whether you are doing the repair yourself or taking the vehicle to a professional mechanic.