P0442 2013 Nissan Rogue Code - EVAP Control System Leak Detected Small Leak
Quick Answer
The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions: - Large and small leaks - Excess vacuum - Purge flow during non-commanded conditions - Fuel Level and Fuel Pressure sensor faults - EVAP Purge and Vent Valve faults The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. Common causes include Missing or loose fuel cap, Incorrect fuel filler cap used, Fuel filler cap remains open or fails to close. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0442 2013 Nissan Rogue indicates EVAP Control System Leak Detected Small Leak.
- Common causes
- Common causes include Missing or loose fuel cap, Incorrect fuel filler cap used, Fuel filler cap remains open or fails to close.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0442 2013 Nissan Rogue Description
- Large and small leaks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.
What are the Possible Causes of the DTC P0442 2013 Nissan Rogue?
- Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
How to Fix the DTC P0442 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
There is a factory Nissan service bulletin to help diagnose the P0442 code:
Nissan Factory Service Bulletin OBDII Code P0442
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0442 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0442 2013 Nissan Rogue code?
Need more information on how to fix the P0442 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0442 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0442 2013 Nissan Rogue Code
1. What does OBDII code P0442 on a 2013 Nissan Rogue mean?
The code P0442 indicates that the EVAP control system has detected a small leak.
2. What are the common symptoms of a P0442 code on a 2013 Nissan Rogue?
Common symptoms include the check engine light illuminating on the dashboard and potential issues passing emissions tests.
3. What are the possible causes of a P0442 code on a 2013 Nissan Rogue?
Potential causes include a loose or damaged gas cap, a small leak in the EVAP system hoses, a faulty EVAP canister, or a malfunctioning purge valve.
4. How can I diagnose a P0442 code on a 2013 Nissan Rogue?
Diagnosis typically involves visually inspecting the EVAP system components, checking the gas cap for proper sealing, and using a smoke machine to detect leaks.
5. Can I continue driving my 2013 Nissan Rogue with a P0442 code?
While the vehicle may still be operable with a P0442 code, it is recommended to address the issue promptly to prevent potential problems with emissions and fuel efficiency.
6. How do I repair a P0442 code on a 2013 Nissan Rogue?
Repair methods may include tightening or replacing the gas cap, repairing or replacing damaged hoses, replacing the EVAP canister, or fixing a faulty purge valve.
7. Are there any DIY tips for resolving a P0442 code on a 2013 Nissan Rogue?
DIY tips may include checking and tightening the gas cap, inspecting visible hoses for damage, and ensuring all EVAP system connections are secure.
8. Can weather or temperature affect the likelihood of a P0442 code on a 2013 Nissan Rogue?
Extreme weather conditions or temperature changes can sometimes exacerbate EVAP system issues leading to a P0442 code.
9. How long does it typically take to repair a P0442 code on a 2013 Nissan Rogue?
The repair time can vary depending on the specific cause of the code, but it may range from a quick fix like tightening the gas cap to more involved repairs like replacing components.
10. Should I reset the check engine light after fixing a P0442 code on a 2013 Nissan Rogue?
After repairing the issue causing the P0442 code, it is recommended to reset the check engine light using an OBDII scanner to ensure the code does not reappear.
Discuss the causes and fixes for P0442 2013 Nissan Rogue OBDII Code
Code P0442 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
