P0442 2010 Nissan Sentra Code - EVAP Control System Leak Detected Small Leak
Quick Answer
The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions: - Large and small leaks - Excess vacuum - Purge flow during non-commanded conditions - Fuel Level and Fuel Pressure sensor faults - EVAP Purge and Vent Valve faults The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. Common causes include Missing or loose fuel cap, Incorrect fuel filler cap used, Fuel filler cap remains open or fails to close. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0442 2010 Nissan Sentra indicates EVAP Control System Leak Detected Small Leak.
- Common causes
- Common causes include Missing or loose fuel cap, Incorrect fuel filler cap used, Fuel filler cap remains open or fails to close.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0442 2010 Nissan Sentra Description
- Large and small leaks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.
What are the Possible Causes of the DTC P0442 2010 Nissan Sentra?
- Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
How to Fix the DTC P0442 2010 Nissan Sentra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
There is a factory Nissan service bulletin to help diagnose the P0442 code:
Nissan Factory Service Bulletin OBDII Code P0442
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0442 2010 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0442 2010 Nissan Sentra code?
Need more information on how to fix the P0442 2010 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0442 2010 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0442 2010 Nissan Sentra Code
1. What does OBDII code P0442 mean on a 2010 Nissan Sentra?
The P0442 code indicates that the EVAP control system has detected a small leak.
2. What are the common symptoms of a P0442 code on a 2010 Nissan Sentra?
Common symptoms include the check engine light illuminating on the dashboard and potential issues with the vehicle's fuel economy.
3. What are the possible causes of a P0442 code on a 2010 Nissan Sentra?
Potential causes include a loose or damaged gas cap, a leak in the EVAP system hoses, a faulty purge valve, or a malfunctioning charcoal canister.
4. How serious is an OBDII code P0442 on a 2010 Nissan Sentra?
While a P0442 code is not an emergency situation, it should be addressed promptly to prevent potential issues with emissions and overall vehicle performance.
5. Can I continue driving my 2010 Nissan Sentra with a P0442 code?
It is generally safe to drive with a P0442 code, but it is recommended to have the issue diagnosed and repaired as soon as possible to avoid further complications.
6. How can I diagnose a P0442 code on my 2010 Nissan Sentra?
Diagnosing a P0442 code usually involves checking the gas cap for tightness, inspecting the EVAP system hoses for leaks, and testing the purge valve and charcoal canister for proper functioning.
7. How can I repair a P0442 code on my 2010 Nissan Sentra?
Repairing a P0442 code may involve tightening or replacing the gas cap, repairing or replacing damaged hoses, replacing the purge valve or charcoal canister, and clearing the code with an OBDII scanner.
8. Are there any DIY tips for fixing a P0442 code on a 2010 Nissan Sentra?
DIY tips include checking and tightening the gas cap, visually inspecting hoses for damage, and cleaning or replacing the purge valve if necessary. However, for more complex issues, it is recommended to seek professional help.
9. How much does it cost to repair a P0442 code on a 2010 Nissan Sentra?
The cost of repairing a P0442 code can vary depending on the specific issue causing the code, the labor rates in your area, and whether you choose to do the repairs yourself or take your vehicle to a mechanic.
10. Will a P0442 code on my 2010 Nissan Sentra affect the vehicle's emissions test?
Yes, a P0442 code can cause your vehicle to fail an emissions test, as it indicates a potential leak in the EVAP system that can affect emissions control. It is recommended to address the issue before undergoing an emissions test.
Discuss the causes and fixes for P0442 2010 Nissan Sentra OBDII Code
Code P0442 2010 Nissan Sentra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
