P0441 Scion Code - Evaporative Emission Control System Incorrect Purge Flow
Quick Answer
5 hours after the ignition switch is turned off, the leak detection pump creates negative pressure (vacuum) in the Evaporative Emission (EVAP) system. Common causes include Loose or missing gas cap, Faulty Purge Vacuum Switching Valve (VSV), Purge Vacuum Switching Valve harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0441 Scion indicates Evaporative Emission Control System Incorrect Purge Flow.
- Common causes
- Common causes include Loose or missing gas cap, Faulty Purge Vacuum Switching Valve (VSV), Purge Vacuum Switching Valve harness is open or shorted.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0441 Scion Description
If stabilized pressure is higher than [second reference pressure x 0.2], ECM determines that Purge Vacuum Switching Valve (VSV) is stuck open. If pressure does not return to near atmospheric pressure, ECM determines that purge VSV is stuck closed. The ECM illuminates the MIL and stores a Diagnostic Trouble Code (DTC) if this malfunction is detected in consecutive drive cycles.
What are the Possible Causes of the DTC P0441 Scion?
- Loose or missing gas cap
- Faulty Purge Vacuum Switching Valve (VSV)
- Purge Vacuum Switching Valve harness is open or shorted
- Purge Vacuum Switching Valve circuit poor electrical connection
- Faulty Canister Pump Module
- Faulty EVAP Canister
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0441 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0441 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0441 Scion code?
Need more information on how to fix the P0441 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0441 Scion code diagnosed by a professional: Find a repair shop in your area
Information for Specific Scion Models
- P0441 2005 Scion xB β Evaporative Emission Control System Incorrect Purge Flow
- P0441 2006 Scion xB β Evaporative Emission Control System Incorrect Purge Flow
- P0441 2007 Scion xB β Evaporative Emission Control System Incorrect Purge Flow
Frequently Asked Questions about P0441 Scion Code
No Frequently Asked Questions about P0441 Scion Code found.
Discuss the causes and fixes for P0441 Scion OBDII Code
Code P0441 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.