P0441 Chrysler Code - EVAP Purge System Performance
Quick Answer
The Powertrain Control Module (PCM) tests the Evaporative Emission (EVAP) system for the following conditions: - Large and small leaks - Excess vacuum - Purge flow during non-commanded conditions - Fuel Level and Fuel Pressure sensor faults - EVAP Purge and Vent Valve faults The PCM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. Common causes include EVAP purge solenoid vacuum supply, EVAP purge hose/tube obstruction, EVAP purge solenoid vacuum supply-evap system leak. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0441 Chrysler indicates EVAP Purge System Performance.
- Common causes
- Common causes include EVAP purge solenoid vacuum supply, EVAP purge hose/tube obstruction, EVAP purge solenoid vacuum supply-evap system leak.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0441 Chrysler Description
- Large and small leaks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The PCM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The PCM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The PCM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.
What are the Possible Causes of the DTC P0441 Chrysler?
- EVAP purge solenoid vacuum supply
- EVAP purge hose/tube obstruction
- EVAP purge solenoid vacuum supply-evap system leak
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0441 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0441 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0441 Chrysler code?
Need more information on how to fix the P0441 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0441 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0441 Chrysler Code
No Frequently Asked Questions about P0441 Chrysler Code found.
Discuss the causes and fixes for P0441 Chrysler OBDII Code
-
Thank you for the information.
In case some one doesn't know: ESIM = Evaporative System Integrity Monitor
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
