P0441 2012 Nissan Rogue Code - Evaporative Control System Incorrect Purge Flow
Quick Answer
The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions: - Large and small leaks - Excess vacuum - Purge flow during non-commanded conditions - Fuel Level and Fuel Pressure sensor faults - EVAP Purge and Vent Valve faults The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0441 2012 Nissan Rogue indicates Evaporative Control System Incorrect Purge Flow.
- Common causes
- Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0441 2012 Nissan Rogue Description
- Large and small leaks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.
What are the Possible Causes of the DTC P0441 2012 Nissan Rogue?
- EVAP canister purge volume control solenoid valve stuck closed
- EVAP control system pressure sensor and the circuit
- Loose, disconnected or improper connection of rubber tube
- Blocked rubber tube
- Cracked EVAP canister
- EVAP canister purge volume control solenoid valve circuit
- Accelerator pedal position sensor
- Blocked purge port
- EVAP canister vent control valve
How to Fix the DTC P0441 2012 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0441 2012 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0441 2012 Nissan Rogue code?
Need more information on how to fix the P0441 2012 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0441 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0441 2012 Nissan Rogue Code
1. What does OBDII code P0441 on a 2012 Nissan Rogue indicate?
- OBDII code P0441 on a 2012 Nissan Rogue suggests an issue with the Evaporative Emission Control System Incorrect Purge Flow.
2. What are the common symptoms of OBDII code P0441 on a 2012 Nissan Rogue?
- Common symptoms of code P0441 include the Check Engine light turning on, decreased fuel efficiency, and a gasoline smell near the vehicle.
3. What are some possible causes of OBDII code P0441 on a 2012 Nissan Rogue?
- Causes of code P0441 may include a faulty purge valve, damaged hoses in the EVAP system, a loose gas cap, or a malfunctioning charcoal canister.
4. How can I diagnose the Evaporative Control System Incorrect Purge Flow issue on my 2012 Nissan Rogue?
- Diagnosing code P0441 may involve inspecting the EVAP system components, checking for leaks in hoses, testing the purge valve, and verifying the gas cap is properly sealed.
5. Can I continue driving my 2012 Nissan Rogue with OBDII code P0441?
- It is generally safe to drive with code P0441, but it is recommended to address the issue promptly to prevent potential damage to the vehicle's emissions system.
6. Are there any simple repairs I can attempt to fix code P0441 on a 2012 Nissan Rogue?
- Simple repairs for code P0441 may include tightening or replacing the gas cap, checking and clearing EVAP system hoses, or cleaning the purge valve.
7. How much does it typically cost to repair OBDII code P0441 on a 2012 Nissan Rogue?
- The cost of repairing code P0441 can vary depending on the specific cause, but it may range from $100 to $500, including parts and labor.
8. Can I reset the Check Engine light after fixing code P0441 on my 2012 Nissan Rogue?
- Yes, you can reset the Check Engine light using an OBDII scanner or by disconnecting the car's battery for a few minutes after addressing the underlying issue.
9. What is the importance of fixing OBDII code P0441 on a 2012 Nissan Rogue?
- Resolving code P0441 is important to ensure proper emissions control, maintain fuel efficiency, and prevent potential long-term damage to the vehicle's engine components.
10. How often does OBDII code P0441 occur in 2012 Nissan Rogues?
- Code P0441 can occur sporadically in 2012 Nissan Rogues, often due to wear and tear on EVAP system components or improper sealing of the fuel system.
Discuss the causes and fixes for P0441 2012 Nissan Rogue OBDII Code
Code P0441 2012 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
