AutoCodes – Nissan – P0441 2011 Nissan Rogue

P0441 2011 Nissan Rogue Code - Evaporative Control System Incorrect Purge Flow

Quick Answer

The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions: - Large and small leaks - Excess vacuum - Purge flow during non-commanded conditions - Fuel Level and Fuel Pressure sensor faults - EVAP Purge and Vent Valve faults The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0441 2011 Nissan Rogue indicates Evaporative Control System Incorrect Purge Flow.
Common causes: Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,882

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0441 2011 Nissan Rogue Description

The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions:
- Large and small leaks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.

OBDII Code P0441 2011 Nissan Rogue - Evaporative Control System Incorrect Purge Flow - AutoCodes.com — P0441 2011 Nissan Rogue Code - Evaporative Control System Incorrect Purge Flow

What does this mean?

What are the Possible Causes of the DTC P0441 2011 Nissan Rogue?

EVAP canister purge volume control solenoid valve stuck closed
EVAP control system pressure sensor and the circuit
Loose, disconnected or improper connection of rubber tube
Blocked rubber tube
Cracked EVAP canister
EVAP canister purge volume control solenoid valve circuit
Accelerator pedal position sensor
Blocked purge port
EVAP canister vent control valve

How to Fix the DTC P0441 2011 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0441 code means that the control module has detected a leak in the Evaporative Emission (EVAP). Loose fuel tank filler cap is the most common cause that triggers the P0441 code.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0441 2011 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0441 2011 Nissan Rogue code?

Need more information on how to fix the P0441 2011 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0441 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0441 2011 Nissan Rogue Code

1. What are common symptoms of OBDII code P0441 in a 2011 Nissan Rogue?

The common symptoms of code P0441 in a 2011 Nissan Rogue include the check engine light illuminating, a noticeable decrease in fuel efficiency, and potential issues with the vehicle's emission control system.

2. What does the OBDII code P0441 indicate in a 2011 Nissan Rogue?

Code P0441 on a 2011 Nissan Rogue indicates a problem with the Evaporative Emission Control System, specifically related to an incorrect purge flow within the system.

3. What are possible causes of OBDII code P0441 in a 2011 Nissan Rogue?

Potential causes of code P0441 in a 2011 Nissan Rogue include a faulty purge control solenoid valve, a leak in the evaporative emission control system, a damaged charcoal canister, or issues with the fuel tank pressure sensor.

4. How can I diagnose the cause of OBDII code P0441 in my 2011 Nissan Rogue?

To diagnose the cause of code P0441 in a 2011 Nissan Rogue, you can perform a visual inspection of the emission control system components, test the purge control solenoid valve, conduct a smoke test to detect leaks, and check the fuel tank pressure sensor.

5. Can I continue driving my 2011 Nissan Rogue with OBDII code P0441?

While the vehicle may still be operational with code P0441, it is recommended to address the issue promptly to prevent potential damage to the emission control system and ensure optimal performance and fuel efficiency.

6. How can I repair OBDII code P0441 in my 2011 Nissan Rogue?

Repair options for code P0441 in a 2011 Nissan Rogue may include replacing the purge control solenoid valve, repairing any leaks in the system, replacing the charcoal canister if necessary, or addressing issues with the fuel tank pressure sensor.

7. Is it possible to reset the OBDII code P0441 in a 2011 Nissan Rogue without fixing the underlying issue?

While clearing the code may temporarily turn off the check engine light, the underlying problem causing code P0441 will persist. It is recommended to diagnose and repair the issue to prevent further complications.

8. Can a DIY enthusiast fix OBDII code P0441 in a 2011 Nissan Rogue?

Depending on the individual's mechanical skills and access to tools, some DIY enthusiasts may be able to address code P0441 in a 2011 Nissan Rogue by following repair guides or seeking assistance from online forums.

9. How much does it typically cost to repair OBDII code P0441 in a 2011 Nissan Rogue at a mechanic?

The cost of repairing code P0441 in a 2011 Nissan Rogue at a mechanic can vary depending on the specific cause of the issue, but it may range from $100 to $500 or more, including parts and labor.

10. Will OBDII code P0441 cause my 2011 Nissan Rogue to fail an emissions test?

Code P0441 can potentially cause a 2011 Nissan Rogue to fail an emissions test, as it indicates a problem with the vehicle's evaporative emission control system, which is crucial for reducing harmful emissions. It is advisable to address the issue before undergoing an emissions test.