AutoCodes – Nissan – P0441 2010 Nissan Pathfinder

P0441 2010 Nissan Pathfinder Code - Evaporative Control System Incorrect Purge Flow

Quick Answer

The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions: - Large and small leaks - Excess vacuum - Purge flow during non-commanded conditions - Fuel Level and Fuel Pressure sensor faults - EVAP Purge and Vent Valve faults The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0441 2010 Nissan Pathfinder indicates Evaporative Control System Incorrect Purge Flow.
Common causes
Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,226
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0441 2010 Nissan Pathfinder Description

The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions:
- Large and small leaks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.
OBDII Code P0441 2010 Nissan Pathfinder - Evaporative Control System Incorrect Purge Flow - AutoCodes.com
P0441 2010 Nissan Pathfinder Code - Evaporative Control System Incorrect Purge Flow

What are the Possible Causes of the DTC P0441 2010 Nissan Pathfinder?

  • EVAP canister purge volume control solenoid valve stuck closed
  • EVAP control system pressure sensor and the circuit
  • Loose, disconnected or improper connection of rubber tube
  • Blocked rubber tube
  • Cracked EVAP canister
  • EVAP canister purge volume control solenoid valve circuit
  • Accelerator pedal position sensor
  • Blocked purge port
  • EVAP canister vent control valve

How to Fix the DTC P0441 2010 Nissan Pathfinder?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0441 2010 Nissan Pathfinder code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0441 2010 Nissan Pathfinder code?

Need more information on how to fix the P0441 2010 Nissan Pathfinder code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0441 2010 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0441 2010 Nissan Pathfinder Code

1. What does OBDII code P0441 on a 2010 Nissan Pathfinder indicate?

The P0441 code indicates a problem with the Evaporative Emission Control System Incorrect Purge Flow.

2. What are the common symptoms of OBDII code P0441 in a 2010 Nissan Pathfinder?

Common symptoms include the check engine light coming on, decreased fuel efficiency, and a gasoline smell near the vehicle.

3. What are the possible causes of OBDII code P0441 in a 2010 Nissan Pathfinder?

Potential causes include a faulty purge valve, a leak in the evaporative emission control system, a clogged charcoal canister, or a malfunctioning vacuum hose.

4. How can I diagnose the cause of OBDII code P0441 in my 2010 Nissan Pathfinder?

Diagnosis typically involves inspecting the purge valve, checking for leaks in the system, testing the charcoal canister, and examining the vacuum hoses for any damage or blockages.

5. Can I continue driving my 2010 Nissan Pathfinder with OBDII code P0441?

While the vehicle may still be operational, it is recommended to address the issue promptly to prevent potential damage to the engine and ensure proper emission control.

6. How can I repair OBDII code P0441 in my 2010 Nissan Pathfinder?

Repair options may include replacing the purge valve, repairing any leaks in the system, cleaning or replacing the charcoal canister, and fixing or replacing damaged vacuum hoses.

7. Is it possible to reset OBDII code P0441 in a 2010 Nissan Pathfinder without fixing the issue?

Resetting the code without addressing the underlying problem will only temporarily turn off the check engine light, as the code is likely to reappear once the issue persists.

8. Are there any preventive maintenance tips to avoid OBDII code P0441 in a 2010 Nissan Pathfinder?

Regularly inspecting and maintaining the evaporative emission control system components, such as the purge valve, charcoal canister, and vacuum hoses, can help prevent the occurrence of code P0441.

9. Can a DIY enthusiast tackle the repair of OBDII code P0441 in a 2010 Nissan Pathfinder?

Depending on the level of expertise, some DIY enthusiasts may be able to diagnose and repair simple causes of P0441, such as replacing the purge valve or checking for loose connections in the system.

10. How long does it typically take to repair OBDII code P0441 in a 2010 Nissan Pathfinder?

The repair time can vary based on the specific cause of the code and the complexity of the components involved, but it may take anywhere from a few hours to a full day for a complete repair.

Discuss the causes and fixes for P0441 2010 Nissan Pathfinder OBDII Code

Code P0441 2010 Nissan Pathfinder comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play