AutoCodes – Scion – P0441 2006 Scion xB

P0441 2006 Scion xB Code - Evaporative Emission Control System Incorrect Purge Flow

Quick Answer

The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. Common causes include Missing Fuel cap, Incorrect fuel filler cap used, Fuel filler cap remains open or fails to close. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0441 2006 Scion xB indicates Evaporative Emission Control System Incorrect Purge Flow.
Common causes: Common causes include Missing Fuel cap, Incorrect fuel filler cap used, Fuel filler cap remains open or fails to close.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,054

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0441 2006 Scion xB Description

The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.

OBDII Code P0441 2006 Scion xB - Evaporative Emission Control System Incorrect Purge Flow - AutoCodes.com — P0441 2006 Scion xB Code - Evaporative Emission Control System Incorrect Purge Flow

What does this mean?

What are the Possible Causes of the DTC P0441 2006 Scion xB?

Missing Fuel cap
Incorrect fuel filler cap used
Fuel filler cap remains open or fails to close
Purge VSV
Connector/wire harness(purge VSV -ECM)
ECM
Canister pump module
Leakage from
EVAP system

How to Fix the DTC P0441 2006 Scion xB?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0441 code means that the control module has detected a leak in the Evaporative Emission (EVAP). Loose fuel tank filler cap is the most common cause that triggers the P0441 code.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0441 2006 Scion xB code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0441 2006 Scion xB code?

Need more information on how to fix the P0441 2006 Scion xB code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0441 2006 Scion xB code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0441 2006 Scion xB Code

1. What does OBDII code P0441 on a 2006 Scion xB mean?

- This code indicates an issue with the Evaporative Emission Control System Incorrect Purge Flow.

2. What are common symptoms of P0441 on a 2006 Scion xB?

- Common symptoms include the Check Engine Light coming on, fuel odor, and possible rough idling or stalling.

3. What are the possible causes of P0441 on a 2006 Scion xB?

- Causes can include a faulty purge valve, damaged hoses, a leak in the evaporative emission system, or a malfunctioning charcoal canister.

4. How do I diagnose the P0441 code on a 2006 Scion xB?

- Diagnosis typically involves checking for leaks in the system, inspecting hoses and connections, testing the purge valve, and checking the charcoal canister.

5. Can I still drive my 2006 Scion xB with the P0441 code?

- It is generally safe to drive the vehicle with this code, but it is recommended to have it diagnosed and repaired to prevent potential emissions issues.

6. How do I repair the P0441 code on a 2006 Scion xB?

- Repairs may involve replacing the purge valve, repairing or replacing damaged hoses, fixing any leaks in the system, or replacing the charcoal canister if necessary.

7. Can I reset the P0441 code on a 2006 Scion xB myself?

- You can clear the code with an OBDII scanner, but it is important to address the underlying issue causing the code to prevent it from reoccurring.

8. How much does it cost to fix the P0441 code on a 2006 Scion xB?

- The cost of repairs can vary depending on the specific issue causing the code, but it may range from $100 to $500 or more.

9. What happens if I ignore the P0441 code on my 2006 Scion xB?

- Ignoring the code can lead to increased emissions, potential fuel economy issues, and may cause the vehicle to fail an emissions test.

10. How common is the P0441 code on a 2006 Scion xB?

- The P0441 code related to the Evaporative Emission Control System Incorrect Purge Flow is a relatively common issue in vehicles, including the 2006 Scion xB.