AutoCodes – Nissan – P0441 2005 Nissan Maxima

P0441 2005 Nissan Maxima Code - Evaporative Control System Incorrect Purge Flow

Quick Answer

The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions: - Large and small leaks - Excess vacuum - Purge flow during non-commanded conditions - Fuel Level and Fuel Pressure sensor faults - EVAP Purge and Vent Valve faults The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0441 2005 Nissan Maxima indicates Evaporative Control System Incorrect Purge Flow.
Common causes: Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,705

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0441 2005 Nissan Maxima Description

The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions:
- Large and small leaks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.

OBDII Code P0441 2005 Nissan Maxima - Evaporative Control System Incorrect Purge Flow - AutoCodes.com — P0441 2005 Nissan Maxima Code - Evaporative Control System Incorrect Purge Flow

What does this mean?

What are the Possible Causes of the DTC P0441 2005 Nissan Maxima?

EVAP canister purge volume control solenoid valve stuck closed
EVAP control system pressure sensor and the circuit
Loose, disconnected or improper connection of rubber tube
Blocked rubber tube
Cracked EVAP canister
EVAP canister purge volume control solenoid valve circuit
Accelerator pedal position sensor
Blocked purge port
EVAP canister vent control valve

How to Fix the DTC P0441 2005 Nissan Maxima?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0441 code means that the control module has detected a leak in the Evaporative Emission (EVAP). Loose fuel tank filler cap is the most common cause that triggers the P0441 code.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0441 2005 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0441 2005 Nissan Maxima code?

Need more information on how to fix the P0441 2005 Nissan Maxima code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0441 2005 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0441 2005 Nissan Maxima Code

1. What are the common symptoms of OBDII code P0441 on a 2005 Nissan Maxima?

- Common symptoms include the illumination of the check engine light, rough idle, decreased fuel efficiency, and a noticeable gasoline odor.

2. What does OBDII code P0441 indicate on a 2005 Nissan Maxima?

- OBDII code P0441 typically indicates a problem with the evaporative emission control system, specifically relating to incorrect purge flow.

3. What are the possible causes of OBDII code P0441 on a 2005 Nissan Maxima?

- Possible causes include a faulty purge control valve, a leak in the evaporative emission control system, a clogged charcoal canister, or issues with the evaporative emission system hoses.

4. How can I diagnose the cause of OBDII code P0441 on my 2005 Nissan Maxima?

- Diagnosing the issue may involve visually inspecting the system for leaks, testing the purge valve for proper operation, checking the charcoal canister for clogs, and using a scan tool to monitor system parameters.

5. Can I continue driving my 2005 Nissan Maxima with OBDII code P0441?

- It is generally safe to drive the vehicle with code P0441, but it is recommended to address the issue promptly to prevent further damage and maintain proper emissions control.

6. How can I repair OBDII code P0441 on my 2005 Nissan Maxima?

- Repairing code P0441 may involve replacing the purge control valve, repairing any leaks in the system, cleaning or replacing the charcoal canister, and ensuring all hoses are properly connected and functioning.

7. Is it possible to reset OBDII code P0441 on a 2005 Nissan Maxima without fixing the underlying issue?

- While you can clear the code using a scan tool, the check engine light will likely return if the root cause of the code (such as a faulty component or leak) is not addressed.

8. How much does it typically cost to repair OBDII code P0441 on a 2005 Nissan Maxima?

- The cost of repairing code P0441 can vary depending on the specific issue, but it may range from $100 to $500 or more, including parts and labor.

9. Are there any preventative maintenance steps I can take to avoid OBDII code P0441 on my 2005 Nissan Maxima?

- Regularly inspecting and maintaining the evaporative emission control system, including checking for leaks and ensuring all components are functioning properly, can help prevent code P0441 from occurring.

10. Can a DIY enthusiast with basic automotive skills repair OBDII code P0441 on a 2005 Nissan Maxima?

- Depending on the specific issue, DIY enthusiasts with basic automotive skills may be able to address code P0441 by replacing components like the purge valve or checking for and repairing simple leaks in the system.