P0406 2014 Chevrolet Silverado Code - Exhaust Gas Recirculation Position Sensor Circuit High Voltage
Quick Answer
The Engine Control Module (ECM) uses the Exhaust Gas Recirculation (EGR) position sensor to determine the position of the EGR valve. Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, Exhaust Gas Recirculation Valve harness is open or shorted, Exhaust Gas Recirculation Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0406 2014 Chevrolet Silverado indicates Exhaust Gas Recirculation Position Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, Exhaust Gas Recirculation Valve harness is open or shorted, Exhaust Gas Recirculation Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0406 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P0406 2014 Chevrolet Silverado?
- Faulty Exhaust Gas Recirculation (EGR) Valve
- Exhaust Gas Recirculation Valve harness is open or shorted
- Exhaust Gas Recirculation Valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0406 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0406 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0406 2014 Chevrolet Silverado code?
Need more information on how to fix the P0406 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0406 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0406 2014 Chevrolet Silverado Code
What does OBDII code P0406 mean on a 2014 Chevrolet Silverado?
P0406 indicates a high voltage issue in the Exhaust Gas Recirculation (EGR) Position Sensor Circuit, suggesting the EGR valve position sensor is sending signals outside the expected range.
What are the common symptoms of code P0406?
Symptoms include reduced engine performance, increased emissions, rough idling, hesitation during acceleration, and the Check Engine Light turning on.
What causes code P0406 on a 2014 Chevrolet Silverado?
Common causes include a faulty EGR valve position sensor, wiring issues such as damaged or corroded wiring, or a malfunctioning EGR valve.
Can a dirty EGR valve trigger code P0406?
Yes, carbon buildup in the EGR valve can interfere with its operation and cause incorrect voltage signals, leading to this code.
How do you diagnose code P0406?
Diagnosis involves checking the EGR valve and position sensor for damage, inspecting wiring and connectors for corrosion or breaks, and using a multimeter to verify voltage readings.
Can driving with code P0406 damage the engine?
While driving for a short period may not cause immediate damage, ignoring the issue can lead to increased emissions and potential harm to engine components over time.
How is code P0406 fixed?
Repairs may include cleaning or replacing the EGR valve, replacing the EGR position sensor, repairing wiring or connectors, or updating the vehicle’s software.
How much does it cost to fix code P0406 on a 2014 Chevrolet Silverado?
Repair costs can range from $150 to $500 depending on whether the EGR valve, position sensor, or wiring needs replacement.
Can a bad EGR position sensor alone cause code P0406?
Yes, if the EGR position sensor fails and sends incorrect voltage signals, it can trigger this code without other components being faulty.
Is code P0406 related to poor fuel efficiency?
Yes, a malfunctioning EGR system can reduce fuel efficiency due to improper exhaust gas recirculation, affecting combustion efficiency.
Discuss the causes and fixes for P0406 2014 Chevrolet Silverado OBDII Code
Code P0406 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
