P0406 2005 Nissan Maxima Code - Exhaust Gas Recirculation Temperature Sensor Circuit High Input
Quick Answer
Early Exhaust Gas Recirculation (EGR) systems component s include and EGR Valve, and Engine Control Μodule (ECΜ) Controlled Vacuum Switch Valve or EGR Solenoid and an EGR Vacuum Μodulator. Common causes include Faulty EGR volume control solenoid valve, Carbon built up on EGR valve, EGR volume control solenoid valve harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0406 2005 Nissan Maxima indicates Exhaust Gas Recirculation Temperature Sensor Circuit High Input.
- Common causes
- Common causes include Faulty EGR volume control solenoid valve, Carbon built up on EGR valve, EGR volume control solenoid valve harness is open or shorted.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0406 2005 Nissan Maxima Description
The EGR system on recently built vehicles uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECΜ. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the ECΜ does not issue the pulse signal. Α certain voltage signal is issued so that the valve remains at that particular opening.
What are the Possible Causes of the DTC P0406 2005 Nissan Maxima?
- Faulty EGR volume control solenoid valve
- Carbon built up on EGR valve
- EGR volume control solenoid valve harness is open or shorted
- EGR volume control solenoid valve circuit poor electrical connection
- Faulty EGR temperature sensor and circuit
How to Fix the DTC P0406 2005 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0406 2005 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0406 2005 Nissan Maxima code?
Need more information on how to fix the P0406 2005 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0406 2005 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0406 2005 Nissan Maxima Code
1. What are the common symptoms of OBDII code P0406 on a 2005 Nissan Maxima?
Common symptoms include the Check Engine Light illuminating, reduced engine performance, rough idling, and potentially increased fuel consumption.
2. What does the OBDII code P0406 for a 2005 Nissan Maxima indicate?
The code P0406 indicates a high input signal from the Exhaust Gas Recirculation (EGR) temperature sensor circuit.
3. What are the possible causes of OBDII code P0406 on a 2005 Nissan Maxima?
Possible causes include a faulty EGR temperature sensor, damaged wiring or connectors in the sensor circuit, or a problem with the EGR valve itself.
4. How can I diagnose the OBDII code P0406 on my 2005 Nissan Maxima?
Diagnosis typically involves using a scan tool to read the code, checking the EGR temperature sensor and its wiring for damage, and testing the EGR valve for proper operation.
5. Can I drive my 2005 Nissan Maxima with OBDII code P0406?
It is not recommended to drive the vehicle with a persistent P0406 code, as it can lead to reduced engine performance and potential long-term damage if left unresolved.
6. How serious is OBDII code P0406 on a 2005 Nissan Maxima?
While the code itself may not cause immediate harm to the vehicle, it can impact engine performance and emissions if not addressed promptly.
7. How can I repair OBDII code P0406 on my 2005 Nissan Maxima?
Repair options may include replacing the EGR temperature sensor, repairing damaged wiring or connectors, or addressing any issues with the EGR valve.
8. Can I clear the OBDII code P0406 on my 2005 Nissan Maxima with a simple reset?
While clearing the code may temporarily turn off the Check Engine Light, it is recommended to diagnose and address the root cause of the issue to prevent it from reoccurring.
9. Is it possible to prevent OBDII code P0406 from appearing on my 2005 Nissan Maxima?
Regular maintenance, such as cleaning the EGR system components and ensuring proper wiring connections, can help prevent issues that may trigger the P0406 code.
10. Should I seek professional help for OBDII code P0406 on my 2005 Nissan Maxima?
If you are unsure about diagnosing or repairing the issue yourself, it is advisable to consult a qualified mechanic or technician to properly address the P0406 code.
Discuss the causes and fixes for P0406 2005 Nissan Maxima OBDII Code
Code P0406 2005 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
