P0402 2000 Toyota Camry Code - Exhaust Gas Recirculation Flow Excessive Detected
Quick Answer
Early Exhaust Gas Recirculation (EGR) systems component s include and EGR Valve, and Engine Control Μodule (ECΜ) Controlled Vacuum Switch Valve or EGR Solenoid and an EGR Vacuum Μodulator. Common causes include EGR volume control valve stuck open, Faulty EGR volume control valve, EGR solenoid valve harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0402 2000 Toyota Camry indicates Exhaust Gas Recirculation Flow Excessive Detected.
- Common causes
- Common causes include EGR volume control valve stuck open, Faulty EGR volume control valve, EGR solenoid valve harness is open or shorted.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0402 2000 Toyota Camry Description
The EGR system on recently built vehicles uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECΜ. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the ECΜ does not issue the pulse signal. Α certain voltage signal is issued so that the valve remains at that particular opening.
What are the Possible Causes of the DTC P0402 2000 Toyota Camry?
- EGR volume control valve stuck open
- Faulty EGR volume control valve
- EGR solenoid valve harness is open or shorted
- EGR solenoid valve circuit poor electrical connection
- Faulty EGR temperature sensor and circuit
- Manifold absolute pressure sensor
- ECM
How to Fix the DTC P0402 2000 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0402 2000 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0402 2000 Toyota Camry code?
Need more information on how to fix the P0402 2000 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0402 2000 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0402 2000 Toyota Camry Code
1. What are the common symptoms of OBDII code P0402 in a 2000 Toyota Camry?
Experiencing a rough idle, reduced fuel efficiency, and potential stalling are common symptoms associated with the P0402 code.
2. What does the OBDII code P0402 in a 2000 Toyota Camry indicate?
P0402 indicates that the Exhaust Gas Recirculation (EGR) system is detecting excessive flow, potentially leading to engine performance issues.
3. What are the possible causes of OBDII code P0402 in a 2000 Toyota Camry?
Potential causes of P0402 include a faulty EGR valve, clogged EGR passages, a malfunctioning EGR temperature sensor, or a problem with the EGR vacuum modulator.
4. How can I diagnose the OBDII code P0402 in my 2000 Toyota Camry?
Diagnosing P0402 may involve checking the EGR valve operation, inspecting EGR system components for blockages, testing the EGR temperature sensor, and verifying vacuum modulator function.
5. What are some DIY repair tips for addressing OBDII code P0402 in a 2000 Toyota Camry?
DIY repair tips may include cleaning or replacing the EGR valve, clearing any carbon buildup in the EGR passages, testing and replacing the EGR temperature sensor if needed, and ensuring proper vacuum modulator operation.
6. Can driving with the OBDII code P0402 in a 2000 Toyota Camry cause further damage?
Continuing to drive with P0402 may lead to reduced engine efficiency, potential damage to engine components, and increased emissions, so it is advisable to address the issue promptly.
7. How much does it typically cost to repair OBDII code P0402 in a 2000 Toyota Camry?
The cost of repairing P0402 can vary depending on the specific cause, but it may range from around $100 for simple DIY fixes to a few hundred dollars if professional help is needed.
8. Is it safe to reset the OBDII code P0402 in a 2000 Toyota Camry without addressing the underlying issue?
Resetting the code without fixing the root cause may temporarily clear the warning light but will not resolve the underlying problem, potentially leading to continued engine performance issues.
9. How long does it take to repair OBDII code P0402 in a 2000 Toyota Camry?
The repair time for P0402 can vary based on the cause and complexity of the issue but may typically range from a few hours for basic repairs to a day or more for more extensive fixes.
10. Can a faulty EGR valve be the sole reason for triggering OBDII code P0402 in a 2000 Toyota Camry?
While a faulty EGR valve is a common culprit for P0402, other components like the EGR temperature sensor or vacuum modulator could also contribute to triggering the code.
Discuss the causes and fixes for P0402 2000 Toyota Camry OBDII Code
Code P0402 2000 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
