P0400 2009 Ford Fusion Code - Exhaust Gas Recirculation Flow
Quick Answer
The electric EGR (EEGR) system is monitored once per drive cycle at high and low load conditions. Common causes include Exhaust Gas Recirculation (EGR) volume control valve stuck closed, Faulty Exhaust Gas Recirculation (EGR) volume control solenoid valve, Faulty EGR Valve. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0400 2009 Ford Fusion indicates Exhaust Gas Recirculation Flow.
- Common causes
- Common causes include Exhaust Gas Recirculation (EGR) volume control valve stuck closed, Faulty Exhaust Gas Recirculation (EGR) volume control solenoid valve, Faulty EGR Valve.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0400 2009 Ford Fusion Description
What are the Possible Causes of the DTC P0400 2009 Ford Fusion?
- Exhaust Gas Recirculation (EGR) volume control valve stuck closed
- Faulty Exhaust Gas Recirculation (EGR) volume control solenoid valve
- Faulty EGR Valve
- Faulty EGR temperature sensor and circuit
- Exhaust Gas Recirculation (EGR) solenoid valve harness is open or shorted
- Exhaust Gas Recirculation (EGR) solenoid valve circuit poor electrical connection
- Dead (Weak) battery
How to Fix the DTC P0400 2009 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0400 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0400 2009 Ford Fusion code?
Need more information on how to fix the P0400 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0400 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0400 2009 Ford Fusion Code
1. What does the OBDII code P0400 mean for a 2009 Ford Fusion?
P0400 indicates a malfunction or insufficient flow in the Exhaust Gas Recirculation (EGR) system.
2. What are the common symptoms of code P0400 on a 2009 Ford Fusion?
Symptoms include rough idle, reduced fuel efficiency, engine hesitation, and the check engine light turning on.
3. What causes the P0400 code on a 2009 Ford Fusion?
Common causes include a clogged EGR valve, faulty EGR solenoid, damaged vacuum hoses, or carbon buildup in EGR passages.
4. Can driving with a P0400 code damage my 2009 Ford Fusion?
While driving is possible, prolonged operation can lead to reduced engine efficiency and potential damage to other components.
5. How do I fix the P0400 code on a 2009 Ford Fusion?
Inspect and clean the EGR valve, check vacuum hoses for leaks, and ensure EGR passages are free of carbon buildup. Replace faulty components if necessary.
6. How do I know if the EGR valve is causing the P0400 code?
A stuck or clogged EGR valve can restrict exhaust gas flow. Testing or cleaning the valve can help determine if it’s the issue.
7. What tools do I need to diagnose the P0400 code on a 2009 Ford Fusion?
You’ll need an OBDII scanner, basic hand tools, and potentially a vacuum pump to test the EGR system.
8. Can the P0400 code be caused by electrical issues?
Yes, a faulty EGR solenoid or wiring issues can disrupt the EGR system and trigger the code.
9. How much does it cost to repair the P0400 code on a 2009 Ford Fusion?
Repair costs vary but typically range from $100 to $400, depending on whether cleaning or replacement of EGR components is needed.
10. Will clearing the P0400 code with an OBDII scanner fix the problem?
Clearing the code will turn off the check engine light temporarily, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P0400 2009 Ford Fusion OBDII Code
Code P0400 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
