P0365 Dodge Code - Camshaft Position Sensor Circuit Bank 1 Sensor 2
Quick Answer
The circuits of the Camshaft Position (CMP) Sensor include a 5-Volt reference circuit supplied by the Powertrain Control Module (PCM), a low reference circuit, and an output signal circuit. Common causes include Faulty Camshaft Position (CMP) Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0365 Dodge indicates Camshaft Position Sensor Circuit Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty Camshaft Position (CMP) Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0365 Dodge Description
A Diagnostic Trouble Code (DTC) is set if the PCM receives either no signal or an incorrect signal from the Camshaft 1/2 Position Sensor.
What are the Possible Causes of the DTC P0365 Dodge?
- Faulty Camshaft Position (CMP) Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
- Camshaft Tone Wheel loose/damaged or misaligned
- Dead (Weak) battery
How to Fix the DTC P0365 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0365 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0365 Dodge code?
Need more information on how to fix the P0365 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0365 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0365 Dodge Code
1. What are the common symptoms of OBDII code P0365 in a Dodge related to the Camshaft Position Sensor Circuit Bank 1 Sensor 2?
The common symptoms include engine misfires, rough idling, stalling, and difficulty starting the vehicle.
2. What are the possible causes of OBDII code P0365 in a Dodge indicating an issue with the Camshaft Position Sensor Circuit Bank 1 Sensor 2?
Possible causes include a faulty camshaft position sensor, damaged wiring or connectors, issues with the sensor circuit, or a problem with the engine control module.
3. How can I diagnose the issue related to OBDII code P0365 in my Dodge?
Diagnosing the problem involves using an OBDII scanner to read the fault code, checking the wiring and connectors for any damage, testing the camshaft position sensor, and inspecting the sensor circuit for faults.
4. Is it safe to continue driving my Dodge with OBDII code P0365 triggered?
It is not recommended to drive the vehicle with this code active, as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.
5. Can I repair OBDII code P0365 in my Dodge related to the Camshaft Position Sensor Circuit Bank 1 Sensor 2 myself?
If you have the necessary tools and expertise, you may be able to repair this issue yourself by replacing the faulty camshaft position sensor, repairing damaged wiring, or addressing any other identified problems.
6. How much does it typically cost to repair OBDII code P0365 in a Dodge at a professional mechanic or dealership?
The cost of repair can vary depending on the exact cause of the issue and the labor rates of the service provider. It is recommended to obtain quotes from different shops for an accurate estimate.
7. Are there any preventative maintenance tips to avoid triggering OBDII code P0365 in a Dodge?
Regularly inspecting the camshaft position sensor, keeping up with recommended service intervals, and addressing any engine performance issues promptly can help prevent triggering this fault code.
8. Can a faulty Camshaft Position Sensor Circuit Bank 1 Sensor 2 affect the overall performance of my Dodge?
Yes, a faulty camshaft position sensor can impact the engine's performance, leading to issues such as rough idling, poor fuel efficiency, and potential engine stalling.
9. Will resetting the OBDII code P0365 in my Dodge make the issue disappear permanently?
Resetting the code may temporarily turn off the check engine light, but if the underlying issue causing the fault code is not addressed, it is likely to reappear. It is important to diagnose and repair the problem to prevent further issues.
10. How long does it typically take to repair OBDII code P0365 in a Dodge related to the Camshaft Position Sensor Circuit Bank 1 Sensor 2?
The repair time can vary depending on the complexity of the issue and the availability of parts. In general, it may take a few hours to a full day to diagnose and repair the problem.
Discuss the causes and fixes for P0365 Dodge OBDII Code
-
I was having issues with my van, a 2018 Dodge Grand Caravan P0365 and I replaced the camshaft sensor but I am still getting the code. I have checked for a faulty wire/connector but it sending signal. I am guessing the previous owner must of dropped or used a magnetic and unmagnetized the roller camshaft. How do I fix this besides replacing the camshaft?
-
it all started with P0305 and p0365, I managed to fix code P0305 but not P0365, I have replaced the camshaft sensor but code is still there.
-
The code P0365 is specific to the Camshaft Position Sensor Bank 1 Sensor 2 (labeled as 5B on the image). Is there a possibility that you might have replaced the incorrect sensor? Apart from the sensor, I haven't come across any other component that could trigger the P0365 code.
Click here to enlarge image
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
