AutoCodesGMC – P0357 2018 GMC Sierra

P0357 2018 GMC Sierra Code - Ignition Coil 7 Control Circuit

Quick Answer

The ignition system on this engine uses ignition coils with integrated power transistors. Common causes include Faulty Ignition Coil 7, Ignition Coil 7 harness is open or shorted, Ignition Coil 7 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0357 2018 GMC Sierra indicates Ignition Coil 7 Control Circuit.
Common causes
Common causes include Faulty Ignition Coil 7, Ignition Coil 7 harness is open or shorted, Ignition Coil 7 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 279
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 25, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0357 2018 GMC Sierra Description

The ignition system on this engine uses ignition coils with integrated power transistors. The Engine Control Module (ECM) controls the spark event for each cylinder through individual ignition coil control circuits. When the ECM commands the ignition control circuit On, electrical current flows through the primary winding of the ignition coil, creating a magnetic field. When a spark event is requested, the ECM commands the ignition control circuit Off, interrupting current flow through the primary winding. The collapsing magnetic field created by the primary winding induces a high voltage in the secondary winding, which is connected to the spark plugs. The Diagnostic Trouble Code (DTC) will be set when the control circuit commanded by the ECM state does not match the actual state.
OBDII Code P0357 2018 GMC Sierra - Ignition Coil 7 Control Circuit - AutoCodes.com
P0357 2018 GMC Sierra Code - Ignition Coil 7 Control Circuit

What are the Possible Causes of the DTC P0357 2018 GMC Sierra?

  • Faulty Ignition Coil 7
  • Ignition Coil 7 harness is open or shorted
  • Ignition Coil 7 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0357 2018 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0357 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0357 2018 GMC Sierra code?

Need more information on how to fix the P0357 2018 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0357 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0357 2018 GMC Sierra Code

What does the OBDII code P0357 mean for a 2018 GMC Sierra?

P0357 indicates an issue with the ignition coil 7 control circuit, which may affect engine performance.

What are the common symptoms of code P0357 in a 2018 GMC Sierra?

Symptoms include engine misfires, rough idling, reduced power, and possibly an illuminated Check Engine Light.

What causes the P0357 code to appear?

Common causes include a faulty ignition coil, damaged wiring or connectors, or a malfunctioning PCM (Powertrain Control Module).

Can I drive my 2018 GMC Sierra with the P0357 code?

Driving with this code is not recommended as it may cause further engine damage or poor performance due to misfires.

How do I diagnose the P0357 code in my GMC Sierra?

Use an OBDII scanner to confirm the code, then inspect ignition coil 7, its wiring, and connectors for damage or corrosion.

What tools do I need to fix the P0357 code?

You’ll need an OBDII scanner, a multimeter for electrical testing, and basic hand tools to check and replace components.

How do I fix the P0357 code on a 2018 GMC Sierra?

Repairs may involve replacing the faulty ignition coil, repairing damaged wiring, or replacing the PCM if necessary.

How much does it cost to fix the P0357 code?

Ignition coil replacement typically costs $100-$250, while wiring repairs or PCM replacement can vary significantly depending on labor and parts.

Can a bad ignition coil cause other problems in my GMC Sierra?

Yes, a bad ignition coil can lead to engine misfires, reduced fuel efficiency, and potential damage to the catalytic converter.

How can I prevent the P0357 code from recurring?

Regular maintenance, including inspecting wiring and ignition components, can help prevent future issues with the ignition control circuit.

Discuss the causes and fixes for P0357 2018 GMC Sierra OBDII Code

Code P0357 2018 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play