P0356 Toyota Code - Ignition Coil 6 Primary/Secondary Circuit
Quick Answer
A Direct Ignition System (DIS) is a 1-cylinder ignition system in which each cylinder is ignited by one ignition coil assembly and one spark plug is connected to the end of each secondary wiring. Common causes include Faulty Ignition Coil 6, Ignition Coil 6 harness is open or shorted, Ignition Coil 6 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0356 Toyota indicates Ignition Coil 6 Primary/Secondary Circuit.
- Common causes
- Common causes include Faulty Ignition Coil 6, Ignition Coil 6 harness is open or shorted, Ignition Coil 6 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0356 Toyota Description
The Engine Control Module (ECM) determines the ignition timing and transmits the ignition (IGT) signals to each cylinder. Using the IGT signal, the ECM turns the power transistor inside the igniter on and off. The power transistor, in turn, switches the current supplied to the primary coil on and off. When the current to the primary coil is cut off, a powerful voltage is generated in the secondary coil. This voltage is applied to the spark plugs, causing them to spark inside the cylinders. As the ECM cuts the current to the primary coil, the igniter sends back an ignition confirmation (IGF) signal to the ECM for each cylinder ignition.
If the ECM does not receive any IGF signals despite transmitting the IGT signal, it interprets this as a fault in the igniter and stores a Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P0356 Toyota?
- Faulty Ignition Coil 6
- Ignition Coil 6 harness is open or shorted
- Ignition Coil 6 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0356 Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0356 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0356 Toyota code?
Need more information on how to fix the P0356 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0356 Toyota code diagnosed by a professional: Find a repair shop in your area
Information for Specific Toyota Models
- P0356 2006 Toyota Camry — Ignition Coil 6 Primary/Secondary Circuit
- P0356 2007 Toyota Camry — Ignition Coil 6 Primary/Secondary Circuit
- P0356 2008 Toyota Camry — Ignition Coil 6 Primary/Secondary Circuit
- P0356 2009 Toyota Camry — Ignition Coil 6 Primary/Secondary Circuit
- P0356 2010 Toyota Camry — Ignition Coil 6 Primary/Secondary Circuit
- P0356 2011 Toyota Camry — Ignition Coil 6 Primary/Secondary Circuit
- P0356 2001 Toyota Highlander — Ignition Coil 6 Primary/Secondary Circuit
- P0356 2002 Toyota Highlander — Ignition Coil 6 Primary/Secondary Circuit
- P0356 2003 Toyota Highlander — Ignition Coil 6 Primary/Secondary Circuit
- P0356 2004 Toyota Highlander — Ignition Coil 6 Primary/Secondary Circuit
- P0356 2005 Toyota Highlander — Ignition Coil 6 Primary/Secondary Circuit
- P0356 2006 Toyota Highlander — Ignition Coil 6 Primary/Secondary Circuit
- P0356 2007 Toyota Highlander — Ignition Coil 6 Primary/Secondary Circuit
Frequently Asked Questions about P0356 Toyota Code
1. What are the common symptoms of OBDII code P0356 in a Toyota related to Ignition Coil 6 Primary/Secondary Circuit?
- Common symptoms include rough idling, engine misfires, loss of power, and illuminated check engine light.
2. What are the possible causes of OBDII code P0356 in a Toyota related to Ignition Coil 6 Primary/Secondary Circuit?
- Possible causes include a faulty ignition coil, wiring issues, poor electrical connections, or a problem with the Engine Control Module (ECM).
3. How can I diagnose the issue causing OBDII code P0356 in a Toyota related to Ignition Coil 6 Primary/Secondary Circuit?
- You can diagnose the issue by checking the ignition coil for proper functionality, inspecting the wiring for damage, and testing electrical connections for continuity.
4. Can I still drive my Toyota with OBDII code P0356 related to Ignition Coil 6 Primary/Secondary Circuit?
- It is not recommended to drive your vehicle with this code as it can lead to further damage and potential safety issues. It's best to address the problem promptly.
5. How can I repair OBDII code P0356 in a Toyota related to Ignition Coil 6 Primary/Secondary Circuit?
- To repair this issue, you may need to replace the faulty ignition coil, repair any damaged wiring, ensure proper electrical connections, and clear the error code using an OBDII scanner.
6. Are there any preventive maintenance tips to avoid OBDII code P0356 in a Toyota related to Ignition Coil 6 Primary/Secondary Circuit?
- Regularly inspecting and maintaining the ignition system, including the coils and wiring, can help prevent issues that lead to this error code.
7. Can a DIY enthusiast fix OBDII code P0356 related to Ignition Coil 6 Primary/Secondary Circuit in a Toyota?
- Depending on your skill level and access to tools, a DIY enthusiast may be able to diagnose and repair this issue. However, professional assistance is recommended for accurate diagnosis and proper repair.
8. How much does it typically cost to repair OBDII code P0356 in a Toyota related to Ignition Coil 6 Primary/Secondary Circuit?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Will resetting the error code resolve OBDII code P0356 in a Toyota related to Ignition Coil 6 Primary/Secondary Circuit?
- Resetting the error code may temporarily turn off the check engine light, but it will not fix the underlying issue causing the code. Proper diagnosis and repair are necessary.
10. Can a bad spark plug cause OBDII code P0356 related to Ignition Coil 6 Primary/Secondary Circuit in a Toyota?
- While a bad spark plug can contribute to ignition system issues, OBDII code P0356 specifically relates to problems with the Ignition Coil 6 Primary/Secondary Circuit, so it is not directly caused by a faulty spark plug.
1. What are the common symptoms of OBDII code P0356 in a Toyota related to the Ignition Coil 6 Primary/Secondary Circuit?
The common symptoms include engine misfires, rough idling, loss of power, and illuminated Check Engine Light.
2. What are the possible causes of OBDII code P0356 in a Toyota?
Potential causes include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, or issues with the Engine Control Module (ECM).
3. How can I diagnose the OBDII code P0356 in my Toyota related to the Ignition Coil 6 Primary/Secondary Circuit?
Diagnosis involves using a scan tool to read the code, performing a visual inspection of the ignition coil and its wiring, conducting resistance tests, and checking for proper voltage.
4. Can I drive my Toyota with an OBDII code P0356 related to the Ignition Coil 6 Primary/Secondary Circuit?
It is not recommended to drive the vehicle with this code as it can lead to further engine damage and poor performance.
5. How do I repair OBDII code P0356 in my Toyota?
Repair typically involves replacing the faulty ignition coil, repairing or replacing damaged wiring or connectors, and clearing the code with a scan tool.
6. Is it possible to prevent OBDII code P0356 from occurring in my Toyota?
Regular maintenance of the ignition system, including timely replacement of ignition coils and spark plugs, can help prevent this code from appearing.
7. Can a DIY enthusiast fix OBDII code P0356 in a Toyota related to the Ignition Coil 6 Primary/Secondary Circuit?
Depending on the individual's skill level and access to tools, a DIY enthusiast may be able to diagnose and replace the faulty ignition coil themselves.
8. How much does it cost to repair OBDII code P0356 in a Toyota at a professional mechanic?
The cost of repair can vary depending on the labor rates in your area, the cost of parts, and any additional issues found during diagnosis.
9. Will resetting the Check Engine Light resolve OBDII code P0356 in my Toyota?
Simply resetting the Check Engine Light will not fix the underlying issue causing the code. Proper diagnosis and repair are necessary to resolve the problem.
10. How long does it typically take to repair OBDII code P0356 in a Toyota at a mechanic?
The repair time can vary depending on the mechanic's workload, availability of parts, and the complexity of the diagnostic and repair process.
Discuss the causes and fixes for P0356 Toyota OBDII Code
Code P0356 Toyota comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
