P0354 2008 Ford Fusion Code - Ignition Coil 'D' Primary/Secondary Circuit
Quick Answer
The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 4, Ignition Coil 4 harness is open or shorted, Ignition Coil 4 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0354 2008 Ford Fusion indicates Ignition Coil 'D' Primary/Secondary Circuit .
- Common causes
- Common causes include Faulty Ignition Coil 4, Ignition Coil 4 harness is open or shorted, Ignition Coil 4 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0354 2008 Ford Fusion Description
What are the Possible Causes of the DTC P0354 2008 Ford Fusion?
- Faulty Ignition Coil 4
- Ignition Coil 4 harness is open or shorted
- Ignition Coil 4 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0354 2008 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0354 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0354 2008 Ford Fusion code?
Need more information on how to fix the P0354 2008 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0354 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0354 2008 Ford Fusion Code
1. What does the OBDII code P0354 mean on a 2008 Ford Fusion?
The P0354 code indicates an issue with the Ignition Coil 'D' Primary/Secondary Circuit, which means the engine control module (ECM) has detected a malfunction in the ignition coil circuit for cylinder 4.
2. What are the common symptoms of a P0354 code?
Symptoms typically include a rough idle, misfires, poor engine performance, decreased fuel efficiency, and the Check Engine Light turning on.
3. What causes a P0354 code on a 2008 Ford Fusion?
Common causes include a faulty ignition coil, damaged or corroded wiring, a bad spark plug, or a malfunctioning engine control module (ECM).
4. How can I diagnose the P0354 code?
Start by inspecting the ignition coil and its wiring for damage or corrosion. Use a scan tool to check for misfires and test the ignition coil's resistance with a multimeter.
5. Can a bad spark plug cause the P0354 code?
Yes, a faulty spark plug can lead to ignition coil issues, causing the P0354 code to appear.
6. How do I fix the P0354 code on my 2008 Ford Fusion?
Repairs may include replacing the faulty ignition coil, repairing or replacing damaged wiring, replacing the spark plug for cylinder 4, or reprogramming the ECM if necessary.
7. Can I drive my 2008 Ford Fusion with a P0354 code?
Driving with a P0354 code is not recommended, as it can lead to poor engine performance and potential damage to the catalytic converter over time.
8. How much does it cost to repair a P0354 code?
The cost depends on the issue. Replacing an ignition coil typically costs $50-$150 for the part, plus labor, while spark plug replacement is generally less expensive.
9. How do I locate Ignition Coil 'D' on my 2008 Ford Fusion?
Ignition Coil 'D' corresponds to cylinder 4, which is typically located on the passenger side of the engine on a 4-cylinder Fusion. Refer to the vehicle’s manual for the cylinder numbering.
10. Can a P0354 code clear itself?
The code may clear temporarily if the issue is intermittent, but the underlying problem will need to be addressed to prevent it from returning.
Discuss the causes and fixes for P0354 2008 Ford Fusion OBDII Code
Code P0354 2008 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
