P0353 2011 Ford Fusion Code - Ignition Coil 'C' Primary/Secondary Circuit
Quick Answer
The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0353 2011 Ford Fusion indicates Ignition Coil 'C' Primary/Secondary Circuit .
- Common causes
- Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0353 2011 Ford Fusion Description
What are the Possible Causes of the DTC P0353 2011 Ford Fusion?
- Faulty Ignition Coil 3
- Ignition Coil 3 harness is open or shorted
- Ignition Coil 3 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0353 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0353 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0353 2011 Ford Fusion code?
Need more information on how to fix the P0353 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0353 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0353 2011 Ford Fusion Code
What does the OBDII code P0353 mean on a 2011 Ford Fusion?
P0353 indicates an issue with the ignition coil "C" primary or secondary circuit, meaning the vehicle's computer has detected a fault in the electrical signal to or from ignition coil "C."
What are the common symptoms of code P0353 in a 2011 Ford Fusion?
Common symptoms include engine misfires, rough idling, poor acceleration, reduced fuel efficiency, and the Check Engine Light being illuminated.
What causes the P0353 code on a 2011 Ford Fusion?
Possible causes include a faulty ignition coil, damaged or corroded wiring/connectors, a defective spark plug, or a malfunctioning powertrain control module (PCM).
Which ignition coil does "C" refer to in a 2011 Ford Fusion?
On a 2011 Ford Fusion with a 4-cylinder engine, ignition coil "C" typically refers to the third cylinder. For a V6 engine, consult the firing order in the service manual to identify coil "C."
Can I drive my 2011 Ford Fusion with code P0353?
It is not recommended to drive with this code active, as it can cause poor performance, potential engine damage, and increased emissions.
How do I diagnose the P0353 code on my 2011 Ford Fusion?
Start by inspecting the ignition coil "C," its wiring, and connectors for damage or corrosion. You can also test the coil with a multimeter or swap it with another cylinder’s coil to see if the issue moves.
How do I fix the P0353 code on a 2011 Ford Fusion?
Repairing this code may involve replacing the faulty ignition coil, repairing or replacing damaged wiring, cleaning connectors, or replacing a defective spark plug.
How much does it cost to fix the P0353 code on a 2011 Ford Fusion?
The cost can vary, but replacing an ignition coil typically costs $50-$150 for the part, plus labor if done by a mechanic.
Could a bad spark plug cause the P0353 code on a 2011 Ford Fusion?
Yes, a bad spark plug can create excessive resistance in the circuit, which could trigger the P0353 code.
What tools do I need to fix the P0353 code on a 2011 Ford Fusion?
You may need a multimeter, an OBDII scanner, basic hand tools, and possibly dielectric grease for reconnecting electrical components securely.
Discuss the causes and fixes for P0353 2011 Ford Fusion OBDII Code
Code P0353 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
