AutoCodes – Honda – P0353 2009 Honda Accord

P0353 2009 Honda Accord Code - Ignition Coil 3 Circuit Malfunction

Quick Answer

The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0353 2009 Honda Accord indicates Ignition Coil 3 Circuit Malfunction.
Common causes: Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,372

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0353 2009 Honda Accord Description

The ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.

OBDII Code P0353 2009 Honda Accord - Ignition Coil 3 Circuit Malfunction - AutoCodes.com — P0353 2009 Honda Accord Code - Ignition Coil 3 Circuit Malfunction

What does this mean?

What are the Possible Causes of the DTC P0353 2009 Honda Accord?

Faulty Ignition Coil 3
Ignition Coil 3 harness is open or shorted
Ignition Coil 3 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0353 2009 Honda Accord?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0353 2009 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0353 2009 Honda Accord code?

Need more information on how to fix the P0353 2009 Honda Accord code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0353 2009 Honda Accord code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0353 2009 Honda Accord Code

What are the common symptoms of OBDII code P0353 on a 2009 Honda Accord?

Common symptoms of OBDII code P0353 (Ignition Coil 3 Circuit Malfunction) on a 2009 Honda Accord may include engine misfires, rough idling, loss of power, and an illuminated check engine light.

What are the possible causes of OBDII code P0353 on a 2009 Honda Accord?

Possible causes of OBDII code P0353 on a 2009 Honda Accord include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, a faulty Engine Control Module (ECM), or a poor electrical connection.

How can I diagnose the OBDII code P0353 on a 2009 Honda Accord?

To diagnose OBDII code P0353 on a 2009 Honda Accord, you can use an OBDII scanner to retrieve the code and then visually inspect the ignition coil and its wiring for any signs of damage. You can also perform a continuity test on the wiring and test the ignition coil's resistance.

What are some repair tips for fixing OBDII code P0353 on a 2009 Honda Accord?

Some repair tips for fixing OBDII code P0353 on a 2009 Honda Accord include replacing the faulty ignition coil, repairing any damaged wiring or connectors in the ignition coil circuit, ensuring a proper electrical connection, and clearing the trouble code with an OBDII scanner.

Can driving with OBDII code P0353 on a 2009 Honda Accord cause further damage?

Driving with OBDII code P0353 on a 2009 Honda Accord can potentially cause further damage to the engine, such as catalytic converter damage due to unburned fuel entering the exhaust system. It is recommended to address the issue promptly to avoid more severe problems.

How much does it typically cost to repair OBDII code P0353 on a 2009 Honda Accord?

The cost to repair OBDII code P0353 on a 2009 Honda Accord can vary depending on the exact cause of the issue. Typically, replacing an ignition coil can cost between $100 to $300, while repairing wiring or connectors may require additional labor costs.

Can I clear the OBDII code P0353 on a 2009 Honda Accord without fixing the underlying issue?

Clearing the OBDII code P0353 on a 2009 Honda Accord without fixing the underlying issue, such as a faulty ignition coil, is not recommended. The issue will likely reoccur, and driving with a malfunctioning ignition coil can lead to further problems with the vehicle's performance and emissions.