P0353 2008 Toyota Camry Code - Ignition Coil 3 Primary/Secondary Circuit
Quick Answer
The DIS is a 1-cylinder ignition system in which each cylinder is ignited by one ignition coil and one spark plug is connected to the end of each secondary wiring. Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0353 2008 Toyota Camry indicates Ignition Coil 3 Primary/Secondary Circuit.
- Common causes
- Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0353 2008 Toyota Camry Description
The ECM determines the ignition timing and transmits the ignition (IGT) signals to each cylinder. Using the IGT signal, the ECM turns the power transistor inside the igniter on and off. The power transistor, in turn, switches on and off the current to the primary coil. When the current to the primary coil is cut off, a powerful voltage is generated in the secondary coil. This voltage is applied to the spark plugs, causing them to spark inside the cylinders. As the ECM cuts the current to the primary coil, the igniter sends back an ignition confirmation (IGF) signal to the ECM, for each cylinder ignition.
What are the Possible Causes of the DTC P0353 2008 Toyota Camry?
- Faulty Ignition Coil 3
- Ignition Coil 3 harness is open or shorted
- Ignition Coil 3 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0353 2008 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0353 2008 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0353 2008 Toyota Camry code?
Need more information on how to fix the P0353 2008 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0353 2008 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0353 2008 Toyota Camry Code
1. What does OBDII code P0353 mean for a 2008 Toyota Camry?
- OBDII code P0353 for a 2008 Toyota Camry signifies a problem in the ignition coil 3 primary/secondary circuit.
2. What are the common symptoms of a P0353 code in a 2008 Toyota Camry?
- Common symptoms of OBDII code P0353 in a 2008 Toyota Camry include engine misfires, rough idling, loss of power, and potentially stalling.
3. What are the possible causes of OBDII code P0353 in a 2008 Toyota Camry?
- The main causes of code P0353 in a 2008 Toyota Camry include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, or issues with the Engine Control Module (ECM).
4. How can I diagnose a P0353 code in my 2008 Toyota Camry?
- To diagnose a P0353 code in a 2008 Toyota Camry, you can use an OBDII scanner to read the code, visually inspect the ignition coil and its connections, check the wiring for any damage, and perform a continuity test on the circuit.
5. Can I continue driving my 2008 Toyota Camry with a P0353 code?
- It is not recommended to drive your 2008 Toyota Camry with a P0353 code, as it can lead to further damage to the engine and other components.
6. How do I repair a P0353 code in my 2008 Toyota Camry?
- Repairing a P0353 code in a 2008 Toyota Camry typically involves replacing the faulty ignition coil, repairing any damaged wiring or connectors, and clearing the code with an OBDII scanner.
7. Are there any DIY tips for fixing a P0353 code in a 2008 Toyota Camry?
- While replacing an ignition coil can be a straightforward DIY task, diagnosing and repairing wiring or ECM issues may require professional help for accurate diagnosis and repair.
8. What is the average cost to repair a P0353 code in a 2008 Toyota Camry?
- The average cost to repair a P0353 code in a 2008 Toyota Camry can vary depending on the exact cause, but it typically ranges from $150 to $300 for parts and labor.
9. How often does the ignition coil need to be replaced in a 2008 Toyota Camry?
- The ignition coil in a 2008 Toyota Camry usually does not need frequent replacement unless it fails or shows signs of wear and tear, such as cracks or damage.
10. Can a P0353 code affect other systems in a 2008 Toyota Camry?
- Yes, a P0353 code can potentially affect other systems in a 2008 Toyota Camry, such as the fuel delivery system and emission control systems, due to engine misfires and performance issues.
Discuss the causes and fixes for P0353 2008 Toyota Camry OBDII Code
Code P0353 2008 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
