P0353 2008 Ford Fusion Code - Ignition Coil 'C' Primary/Secondary Circuit
Quick Answer
The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0353 2008 Ford Fusion indicates Ignition Coil 'C' Primary/Secondary Circuit .
- Common causes
- Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0353 2008 Ford Fusion Description
What are the Possible Causes of the DTC P0353 2008 Ford Fusion?
- Faulty Ignition Coil 3
- Ignition Coil 3 harness is open or shorted
- Ignition Coil 3 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0353 2008 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0353 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0353 2008 Ford Fusion code?
Need more information on how to fix the P0353 2008 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0353 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0353 2008 Ford Fusion Code
1. What does OBDII code P0353 for a 2008 Ford Fusion indicate?
- This code signifies an issue with the Ignition Coil 'C' Primary/Secondary Circuit.
2. What are common symptoms of OBDII code P0353 in a 2008 Ford Fusion?
- Common symptoms include engine misfires, rough idling, decreased fuel efficiency, and difficulty starting the vehicle.
3. What are the possible causes of OBDII code P0353 in a 2008 Ford Fusion?
- The main causes can be a faulty ignition coil 'C', damaged wiring or connectors, or issues with the engine control module (ECM).
4. How can I diagnose the source of OBDII code P0353 in my 2008 Ford Fusion?
- You can use a multimeter to test the ignition coil, inspect the wiring for any damage, and check the connectors for proper connection.
5. Can I continue driving my 2008 Ford Fusion with OBDII code P0353?
- It is not recommended to drive your vehicle with this code as it can lead to further damage and potential safety hazards.
6. What is the typical repair process for OBDII code P0353 in a 2008 Ford Fusion?
- The typical repair involves replacing the faulty ignition coil 'C', repairing or replacing damaged wiring, and clearing the trouble code.
7. How much does it cost to fix OBDII code P0353 in a 2008 Ford Fusion?
- The cost can vary depending on the exact cause of the issue, but typically, replacing an ignition coil can range from $100 to $300.
8. Are there any preventive maintenance tips to avoid OBDII code P0353 in a 2008 Ford Fusion?
- Regularly inspecting and maintaining the ignition system and wiring can help prevent issues that lead to this trouble code.
9. Can a DIY enthusiast fix OBDII code P0353 in a 2008 Ford Fusion?
- Depending on your skill level and access to tools, DIY enthusiasts can often replace an ignition coil or check wiring, but professional diagnosis is recommended.
10. How long does it take to repair OBDII code P0353 in a 2008 Ford Fusion?
- The repair time can vary based on the exact issue, but replacing an ignition coil typically takes around 1-2 hours.
Discuss the causes and fixes for P0353 2008 Ford Fusion OBDII Code
Code P0353 2008 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
