AutoCodes – Toyota – P0353 2003 Toyota Highlander

P0353 2003 Toyota Highlander Code - Ignition Coil 3 Primary/Secondary Circuit

Quick Answer

The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0353 2003 Toyota Highlander indicates Ignition Coil 3 Primary/Secondary Circuit.
Common causes
Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,420
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 29, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0353 2003 Toyota Highlander Description

The ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.
OBDII Code P0353 2003 Toyota Highlander - Ignition Coil 3 Primary/Secondary Circuit - AutoCodes.com
P0353 2003 Toyota Highlander Code - Ignition Coil 3 Primary/Secondary Circuit

What are the Possible Causes of the DTC P0353 2003 Toyota Highlander?

  • Faulty Ignition Coil 3
  • Ignition Coil 3 harness is open or shorted
  • Ignition Coil 3 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0353 2003 Toyota Highlander?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0353 2003 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0353 2003 Toyota Highlander code?

Need more information on how to fix the P0353 2003 Toyota Highlander code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0353 2003 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0353 2003 Toyota Highlander Code

1. What does OBDII code P0353 for a 2003 Toyota Highlander indicate?

The code P0353 indicates a problem with the ignition coil 3 primary/secondary circuit in the vehicle.

2. What are some common symptoms associated with OBDII code P0353 on a Toyota Highlander?

Common symptoms include engine misfires, rough idling, lack of power, and difficulty starting the vehicle.

3. What can cause OBDII code P0353 to trigger in a 2003 Toyota Highlander?

Possible causes of code P0353 include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, or issues with the engine control module.

4. How can I diagnose the issue causing OBDII code P0353 on my Toyota Highlander?

Diagnosis typically involves checking the ignition coil, inspecting the wiring and connectors for damage, and using a multimeter to test the circuit's continuity and resistance.

5. Can driving with OBDII code P0353 on a Toyota Highlander cause further damage?

Continuing to drive with code P0353 may lead to more severe engine issues, decreased fuel efficiency, and potential damage to the catalytic converter.

6. Is it safe to replace the ignition coil for code P0353 on a 2003 Toyota Highlander myself?

Replacing the ignition coil can be a DIY task for those with automotive repair experience, but if unsure, it's recommended to seek professional help to ensure proper installation.

7. Are there any maintenance tips to prevent OBDII code P0353 in a Toyota Highlander?

Regularly servicing the ignition system, checking and replacing spark plugs as needed, and addressing any engine performance issues promptly can help prevent code P0353.

8. Can a faulty spark plug cause OBDII code P0353 to appear on a Toyota Highlander?

While a faulty spark plug may not directly trigger code P0353, it can contribute to ignition system issues that may lead to the code being detected.

9. How much does it typically cost to repair OBDII code P0353 on a 2003 Toyota Highlander?

The cost of repairing code P0353 can vary depending on the root cause, but it may range from $100 to $300 for parts and labor.

10. Will resetting the OBDII system clear code P0353 on a Toyota Highlander?

Resetting the system may temporarily clear the code, but if the underlying issue causing code P0353 is not addressed, the code is likely to reappear.

Discuss the causes and fixes for P0353 2003 Toyota Highlander OBDII Code

Code P0353 2003 Toyota Highlander comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play