P0351 2010 Honda Accord Code - Ignition Coil 1 Circuit Malfunction
Quick Answer
The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 1, Ignition Coil 1 harness is open or shorted, Ignition Coil 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0351 2010 Honda Accord indicates Ignition Coil 1 Circuit Malfunction.
- Common causes
- Common causes include Faulty Ignition Coil 1, Ignition Coil 1 harness is open or shorted, Ignition Coil 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0351 2010 Honda Accord Description
What are the Possible Causes of the DTC P0351 2010 Honda Accord?
- Faulty Ignition Coil 1
- Ignition Coil 1 harness is open or shorted
- Ignition Coil 1 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0351 2010 Honda Accord?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0351 2010 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0351 2010 Honda Accord code?
Need more information on how to fix the P0351 2010 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0351 2010 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0351 2010 Honda Accord Code
1. What are the common symptoms of OBDII code P0351 on a 2010 Honda Accord?
The common symptoms of OBDII code P0351, indicating an Ignition Coil 1 Circuit Malfunction, include rough idling, engine misfires, lack of power, and illuminated check engine light.
2. What are the possible causes of OBDII code P0351 on a 2010 Honda Accord?
The potential causes of OBDII code P0351 on a 2010 Honda Accord include a faulty ignition coil, wiring or connection issues in the ignition coil circuit, or a problem with the Engine Control Module (ECM).
3. How can I diagnose the OBDII code P0351 on my 2010 Honda Accord?
To diagnose OBDII code P0351, you can start by checking the ignition coil for proper functioning, inspecting the wiring and connections related to the ignition coil, and using a scan tool to gather more specific diagnostic trouble codes.
4. Can driving with OBDII code P0351 on a 2010 Honda Accord cause further damage?
Continuing to drive with OBDII code P0351, indicating an Ignition Coil 1 Circuit Malfunction, can potentially lead to further damage to the engine, decreased fuel efficiency, and increased emissions. It is recommended to address the issue promptly.
5. How do I repair OBDII code P0351 on my 2010 Honda Accord?
To repair OBDII code P0351, you may need to replace the faulty ignition coil, repair any damaged wiring or connections, or reset the Engine Control Module (ECM) after fixing the issue. It is advisable to follow the manufacturer's repair procedures.
6. Can a DIY enthusiast fix OBDII code P0351 on a 2010 Honda Accord?
A DIY enthusiast with the necessary tools and knowledge can potentially fix OBDII code P0351 by replacing the faulty ignition coil, checking and repairing any wiring issues, and clearing the trouble code using a scan tool.
7. Is it safe to continue driving my 2010 Honda Accord with OBDII code P0351 if the symptoms are not severe?
While it may be tempting to continue driving if the symptoms are not severe, it is not recommended to ignore OBDII code P0351. Addressing the issue promptly can prevent further complications and ensure the proper functioning of your vehicle.
8. How much does it typically cost to repair OBDII code P0351 on a 2010 Honda Accord?
The cost of repairing OBDII code P0351 on a 2010 Honda Accord can vary depending on the root cause of the issue, the cost of parts, and labor charges. It is advisable to obtain quotes from different repair shops for an accurate estimate.
9. Can bad spark plugs cause OBDII code P0351 on a 2010 Honda Accord?
While bad spark plugs can contribute to ignition issues, OBDII code P0351 specifically relates to the Ignition Coil 1 Circuit Malfunction. It is recommended to diagnose the problem accurately to determine the root cause and ensure proper repair.
10. How long does it take to repair OBDII code P0351 on a 2010 Honda Accord?
The time taken to repair OBDII code P0351 on a 2010 Honda Accord can vary based on the complexity of the issue, availability of parts, and the expertise of the technician. Typically, it may take a few hours to a day for diagnosis and repair.
Discuss the causes and fixes for P0351 2010 Honda Accord OBDII Code
Code P0351 2010 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
