P0351 2007 Toyota Camry Code - Ignition Coil 1 Primary/Secondary Circuit
Quick Answer
The DIS is a 1-cylinder ignition system in which each cylinder is ignited by one ignition coil and one spark plug is connected to the end of each secondary wiring. Common causes include Faulty Ignition Coil 1, Ignition Coil 1 harness is open or shorted, Ignition Coil 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0351 2007 Toyota Camry indicates Ignition Coil 1 Primary/Secondary Circuit.
- Common causes
- Common causes include Faulty Ignition Coil 1, Ignition Coil 1 harness is open or shorted, Ignition Coil 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0351 2007 Toyota Camry Description
The ECM determines the ignition timing and transmits the ignition (IGT) signals to each cylinder. Using the IGT signal, the ECM turns the power transistor inside the igniter on and off. The power transistor, in turn, switches on and off the current to the primary coil. When the current to the primary coil is cut off, a powerful voltage is generated in the secondary coil. This voltage is applied to the spark plugs, causing them to spark inside the cylinders. As the ECM cuts the current to the primary coil, the igniter sends back an ignition confirmation (IGF) signal to the ECM, for each cylinder ignition.
What are the Possible Causes of the DTC P0351 2007 Toyota Camry?
- Faulty Ignition Coil 1
- Ignition Coil 1 harness is open or shorted
- Ignition Coil 1 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0351 2007 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0351 2007 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0351 2007 Toyota Camry code?
Need more information on how to fix the P0351 2007 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0351 2007 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0351 2007 Toyota Camry Code
1. What are the common symptoms of OBDII code P0351 in a 2007 Toyota Camry?
- Common symptoms include engine misfires, rough idling, poor fuel efficiency, and difficulty starting the vehicle.
2. What does OBDII code P0351 indicating the "Ignition Coil 1 Primary/Secondary Circuit" mean for a 2007 Toyota Camry?
- This code indicates a malfunction in the primary or secondary circuit of the ignition coil for cylinder 1 in the engine.
3. What are the possible causes of OBDII code P0351 in a 2007 Toyota Camry?
- The potential causes include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, or issues with the Engine Control Module (ECM).
4. How can I diagnose the root cause of OBDII code P0351 in my 2007 Toyota Camry?
- You can diagnose the issue by inspecting the ignition coil, checking the wiring and connectors for damage, and using a scan tool to analyze the ECM data.
5. Can I continue driving my 2007 Toyota Camry with OBDII code P0351?
- It is not recommended to drive the vehicle with this code, as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.
6. How can I repair OBDII code P0351 in a 2007 Toyota Camry?
- The repair typically involves replacing the faulty ignition coil, repairing any damaged wiring or connectors, and clearing the trouble code from the ECM.
7. Are there any tips for preventing OBDII code P0351 from recurring in my 2007 Toyota Camry?
- Regular maintenance, such as checking and replacing ignition components at recommended intervals, can help prevent the recurrence of this code.
8. How much does it cost to repair OBDII code P0351 in a 2007 Toyota Camry?
- The cost can vary depending on the specific issue, but it generally ranges from $100 to $300 for parts and labor.
9. Can I reset the OBDII code P0351 in my 2007 Toyota Camry without repairing the issue?
- While you can clear the code using an OBDII scanner, it is essential to address the underlying problem to prevent it from coming back.
10. Is it possible to replace the ignition coil in a 2007 Toyota Camry myself to resolve OBDII code P0351?
- If you have the necessary tools and mechanical skills, you can replace the ignition coil yourself. However, if you are unsure, it is best to seek professional help to ensure proper installation and function.
Discuss the causes and fixes for P0351 2007 Toyota Camry OBDII Code
-
Okay we know what PO351 is but which of the six ignition coils is the faulty one ??? Is there a clue in sorting it out .
-
is the ignition control module built in to ecm on this yr /model or separate location
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
