P0346 Audi Code - Camshaft Position Sensor Intake Circuit Range/Performance Bank 2
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0346 Audi indicates Camshaft Position Sensor Intake Circuit Range/Performance Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0346 Audi Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0346 Audi?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0346 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0346 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0346 Audi code?
Need more information on how to fix the P0346 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0346 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0346 Audi Code
1. What are the common symptoms of OBDII code P0346 in an Audi related to the Camshaft Position Sensor Intake Circuit Range/Performance Bank 2?
- Common symptoms include rough idling, engine misfires, poor acceleration, and in some cases, the engine may not start.
2. What are the possible causes of OBDII code P0346 in an Audi?
- The code may be triggered by a faulty camshaft position sensor, wiring issues, a damaged sensor connector, or a problem with the engine control module (ECM).
3. How can I diagnose the cause of OBDII code P0346 in my Audi?
- Diagnosing the issue typically involves checking the camshaft position sensor, inspecting the wiring and connector for any damage, and testing the ECM for proper functionality.
4. Can driving with OBDII code P0346 in an Audi cause further damage?
- Continuing to drive with this code may lead to poor engine performance, increased fuel consumption, and potential damage to other engine components over time.
5. How can I repair OBDII code P0346 in an Audi?
- The repair usually involves replacing the faulty camshaft position sensor, repairing any damaged wiring or connectors, and resetting the fault code with a diagnostic tool.
6. Are there any preventive maintenance tips to avoid OBDII code P0346 in an Audi?
- Regularly inspecting the camshaft position sensor, keeping the wiring connections clean and secure, and following the manufacturer's recommended maintenance schedule can help prevent this code.
7. Is it safe to drive my Audi with OBDII code P0346 if the symptoms are not severe?
- While it may be possible to drive with minor symptoms, it is recommended to address the issue promptly to prevent further damage to the engine.
8. Can a DIY enthusiast repair OBDII code P0346 in an Audi?
- Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to replace the camshaft position sensor or repair wiring issues, but professional diagnosis is recommended.
9. How long does it typically take to repair OBDII code P0346 in an Audi at a mechanic's shop?
- The repair time can vary depending on the exact cause of the code, but it usually takes a few hours to diagnose and replace the camshaft position sensor or repair related components.
10. Will resetting the fault code temporarily fix OBDII code P0346 in an Audi?
- Resetting the fault code may temporarily clear the warning light, but if the underlying issue is not addressed, the code is likely to reappear.
Discuss the causes and fixes for P0346 Audi OBDII Code
Code P0346 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
