P0346 2011 Ford Fusion Code - Camshaft Position Sensor 'A' Circuit Range/Performance Bank 2
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0346 2011 Ford Fusion indicates Camshaft Position Sensor 'A' Circuit Range/Performance Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0346 2011 Ford Fusion Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0346 2011 Ford Fusion?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0346 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0346 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0346 2011 Ford Fusion code?
Need more information on how to fix the P0346 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0346 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0346 2011 Ford Fusion Code
1. What does the OBDII code P0346 mean on a 2011 Ford Fusion?
P0346 indicates a problem with the Camshaft Position Sensor 'A' Circuit Range/Performance on Bank 2. It means the sensor is sending signals that are out of the expected range.
2. What are the symptoms of code P0346 in a 2011 Ford Fusion?
Common symptoms include engine misfires, rough idling, reduced fuel efficiency, stalling, difficulty starting, or the Check Engine Light being illuminated.
3. What causes the P0346 code in a 2011 Ford Fusion?
Possible causes include a faulty camshaft position sensor, damaged wiring or connectors, a malfunctioning timing chain or belt, or issues with the powertrain control module (PCM).
4. How do I fix the P0346 code on a 2011 Ford Fusion?
Start by inspecting and repairing any damaged wiring or connectors, replacing the camshaft position sensor if faulty, and ensuring the timing components are functioning correctly.
5. Can I drive my 2011 Ford Fusion with the P0346 code?
Driving with this code is not recommended, as it can lead to poor engine performance, stalling, or further engine damage.
6. How do I diagnose the P0346 code on a 2011 Ford Fusion?
Use an OBDII scanner to confirm the code, then visually inspect the sensor and wiring. Test the camshaft position sensor using a multimeter and check the timing components for wear or misalignment.
7. Where is the camshaft position sensor located on a 2011 Ford Fusion?
On the 2011 Ford Fusion, the camshaft position sensor for Bank 2 is typically located near the cylinder head on the exhaust side of the engine.
8. How much does it cost to fix the P0346 code on a 2011 Ford Fusion?
The cost varies depending on the issue. Replacing a camshaft position sensor typically costs $100-$300, including parts and labor. Repairs to timing components or wiring may cost more.
9. Can a bad battery cause the P0346 code in a 2011 Ford Fusion?
A weak or failing battery can contribute to electrical issues, but it is not a common cause of the P0346 code. Always check the sensor and wiring first.
10. What happens if I ignore the P0346 code on my 2011 Ford Fusion?
Ignoring this code can lead to worsening engine performance, increased fuel consumption, potential engine stalling, and expensive repairs if the timing system fails.
Discuss the causes and fixes for P0346 2011 Ford Fusion OBDII Code
Code P0346 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
