P0345 2011 Toyota Camry Code - Camshaft Position Sensor 'A' Circuit Bank 2
Quick Answer
The Camshaft Position (CMP) sensor consists of a magnet and an iron core which is wrapped with copper wire, and is installed onto the cylinder head. Common causes include Faulty Camshaft Position Sensor, VVT Sensor for Intake Camshaft (For V6 engine), Camshaft Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 2011 Toyota Camry indicates Camshaft Position Sensor 'A' Circuit Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, VVT Sensor for Intake Camshaft (For V6 engine), Camshaft Position Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 2011 Toyota Camry Description
What are the Possible Causes of the DTC P0345 2011 Toyota Camry?
- Faulty Camshaft Position Sensor
- VVT Sensor for Intake Camshaft (For V6 engine)
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
- Timing Chain Jumped Tooth
How to Fix the DTC P0345 2011 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 2011 Toyota Camry code?
Need more information on how to fix the P0345 2011 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 2011 Toyota Camry Code
1. What does the OBDII code P0345 mean on a 2011 Toyota Camry?
The P0345 code indicates an issue with the Camshaft Position Sensor 'A' Circuit on Bank 2, which means the sensor is not sending the correct signal to the engine control module (ECM).
2. What are the common symptoms of a P0345 code on a 2011 Toyota Camry?
Symptoms may include engine stalling, poor acceleration, rough idling, difficulty starting, or the Check Engine Light illuminating.
3. What causes the P0345 code to appear on a 2011 Toyota Camry?
Potential causes include a faulty camshaft position sensor, damaged wiring or connectors, a timing chain or belt issue, or a malfunctioning ECM.
4. How do I identify Bank 2 on my 2011 Toyota Camry?
Bank 2 refers to the side of the engine that does not contain cylinder 1, typically the side opposite Bank 1 in a V6 engine.
5. Can I drive my 2011 Toyota Camry with a P0345 code?
It’s not recommended to drive with this code, as it can lead to poor performance, stalling, or potential engine damage.
6. How do I fix the P0345 code on a 2011 Toyota Camry?
Start by inspecting the camshaft position sensor, wiring, and connectors for damage. Replace the sensor if necessary, or repair any damaged wiring. If the issue persists, further diagnostics may be needed.
7. How much does it cost to fix a P0345 code on a 2011 Toyota Camry?
The cost to replace a camshaft position sensor typically ranges from $100 to $300, including parts and labor. Additional repairs may increase the cost.
8. Can a bad battery cause the P0345 code on a 2011 Toyota Camry?
Yes, a weak or faulty battery can cause voltage issues that may trigger the P0345 code due to improper sensor signals.
9. What tools are needed to diagnose the P0345 code on a 2011 Toyota Camry?
You’ll need an OBDII scanner, a multimeter to check wiring continuity, and potentially a repair manual for your vehicle.
10. Will clearing the P0345 code fix the problem on a 2011 Toyota Camry?
Clearing the code may temporarily turn off the Check Engine Light, but it won’t fix the underlying issue. Proper diagnostics and repairs are required to resolve the problem.
Discuss the causes and fixes for P0345 2011 Toyota Camry OBDII Code
Code P0345 2011 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
