P0345 2010 Toyota Camry Code - Camshaft Position Sensor 'A' Circuit Bank 2
Quick Answer
The Camshaft Position (CMP) sensor consists of a magnet and an iron core which is wrapped with copper wire, and is installed onto the cylinder head. Common causes include Faulty Camshaft Position Sensor, VVT Sensor for Intake Camshaft (For V6 engine), Camshaft Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 2010 Toyota Camry indicates Camshaft Position Sensor 'A' Circuit Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, VVT Sensor for Intake Camshaft (For V6 engine), Camshaft Position Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 2010 Toyota Camry Description
What are the Possible Causes of the DTC P0345 2010 Toyota Camry?
- Faulty Camshaft Position Sensor
- VVT Sensor for Intake Camshaft (For V6 engine)
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
- Timing Chain Jumped Tooth
How to Fix the DTC P0345 2010 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 2010 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 2010 Toyota Camry code?
Need more information on how to fix the P0345 2010 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 2010 Toyota Camry Code
What does the OBDII code P0345 mean on a 2010 Toyota Camry?
P0345 indicates an issue with the Camshaft Position Sensor 'A' Circuit on Bank 2, which means the sensor is providing an incorrect or no signal to the engine control module (ECM).
What are the common symptoms of code P0345 in a 2010 Toyota Camry?
Symptoms may include difficulty starting, rough idling, reduced engine performance, poor fuel economy, and the Check Engine Light being illuminated.
What causes the P0345 code to appear on a 2010 Toyota Camry?
Common causes include a faulty camshaft position sensor, damaged wiring or connectors in the sensor circuit, a timing chain or belt issue, or a problem with the ECM.
How can I diagnose the P0345 code on my 2010 Toyota Camry?
Use an OBDII scanner to confirm the code, inspect the wiring and connectors for damage, test the camshaft position sensor with a multimeter, and check the timing components for alignment issues.
Can I drive my 2010 Toyota Camry with a P0345 code?
Driving with a P0345 code is not recommended because it can lead to poor performance, stalling, and potential engine damage if left unresolved.
How do I fix the P0345 code on a 2010 Toyota Camry?
Repairs may involve replacing the camshaft position sensor, repairing damaged wiring or connectors, ensuring proper timing alignment, or replacing the ECM if necessary.
Where is Bank 2 located on a 2010 Toyota Camry?
Bank 2 refers to the side of the engine that does not contain cylinder 1, which is typically the side with cylinders 2, 4, and 6 in a V6 engine.
How much does it cost to fix a P0345 code on a 2010 Toyota Camry?
The cost varies, but replacing a camshaft position sensor typically ranges from $100 to $300, including parts and labor. Additional repairs, like fixing wiring or timing issues, may increase the cost.
Can a bad battery cause the P0345 code on a 2010 Toyota Camry?
Yes, a weak or failing battery can cause voltage issues that affect the camshaft position sensor circuit, potentially triggering the P0345 code.
Does the P0345 code always mean the camshaft position sensor is faulty?
No, the issue could also stem from wiring problems, a timing misalignment, or a malfunctioning ECM, so thorough diagnosis is essential.
Discuss the causes and fixes for P0345 2010 Toyota Camry OBDII Code
Code P0345 2010 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
