P0345 2009 Toyota Camry Code - Camshaft Position Sensor 'A' Circuit Bank 2
Quick Answer
The Camshaft Position (CMP) sensor consists of a magnet and an iron core which is wrapped with copper wire, and is installed onto the cylinder head. Common causes include Faulty Camshaft Position Sensor, VVT Sensor for Intake Camshaft (For V6 engine), Camshaft Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 2009 Toyota Camry indicates Camshaft Position Sensor 'A' Circuit Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, VVT Sensor for Intake Camshaft (For V6 engine), Camshaft Position Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 2009 Toyota Camry Description
What are the Possible Causes of the DTC P0345 2009 Toyota Camry?
- Faulty Camshaft Position Sensor
- VVT Sensor for Intake Camshaft (For V6 engine)
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
- Timing Chain Jumped Tooth
How to Fix the DTC P0345 2009 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 2009 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 2009 Toyota Camry code?
Need more information on how to fix the P0345 2009 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 2009 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 2009 Toyota Camry Code
1. What does the OBDII code P0345 mean on a 2009 Toyota Camry?
P0345 indicates a fault in the Camshaft Position Sensor 'A' Circuit for Bank 2, meaning the sensor is not sending the expected signal to the engine control module.
2. What are the common symptoms of code P0345 in a 2009 Toyota Camry?
Symptoms may include rough idling, difficulty starting, reduced engine performance, misfires, or the engine stalling unexpectedly.
3. What causes the P0345 code in a 2009 Toyota Camry?
Common causes include a faulty camshaft position sensor, damaged wiring or connectors, a failed timing chain or belt, or an issue with the engine control module (ECM).
4. How do I know which is Bank 2 in a 2009 Toyota Camry?
In a 2009 Toyota Camry, Bank 2 refers to the side of the engine with cylinders 2, 4, and 6, typically the side opposite the first cylinder (Bank 1).
5. Can a bad camshaft position sensor cause a P0345 code?
Yes, a bad camshaft position sensor is one of the most common causes of the P0345 code.
6. How can I fix the P0345 code on my 2009 Toyota Camry?
Repairs may include replacing the camshaft position sensor, repairing damaged wiring or connectors, checking and correcting the timing chain or belt, or reprogramming the ECM if needed.
7. Is it safe to drive with a P0345 code on a 2009 Toyota Camry?
It is not recommended to drive with this code, as it can lead to poor engine performance, stalling, or even damage to the engine over time.
8. How can I diagnose the P0345 code on my 2009 Toyota Camry?
Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the wiring and connectors, testing the camshaft position sensor with a multimeter, and checking the timing system for proper alignment.
9. How much does it cost to fix the P0345 code on a 2009 Toyota Camry?
The repair cost can vary, but replacing a camshaft position sensor typically costs $100-$300, including parts and labor. Additional repairs like fixing wiring or timing components will increase the cost.
10. Can a bad timing chain or belt cause a P0345 code?
Yes, if the timing chain or belt is worn or misaligned, it can disrupt the camshaft's position, triggering the P0345 code.
Discuss the causes and fixes for P0345 2009 Toyota Camry OBDII Code
Code P0345 2009 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
