P0345 2009 Nissan Altima Sedan Code - Camshaft Position Sensor Circuit Bank 2
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 2009 Nissan Altima Sedan indicates Camshaft Position Sensor Circuit Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 2009 Nissan Altima Sedan Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0345 2009 Nissan Altima Sedan?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0345 2009 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 2009 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 2009 Nissan Altima Sedan code?
Need more information on how to fix the P0345 2009 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 2009 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 2009 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0345 in a 2009 Nissan Altima Sedan?
- Common symptoms include engine misfires, rough idling, difficulty starting the vehicle, and a decrease in overall engine performance.
2. What does OBDII code P0345 indicate in a 2009 Nissan Altima Sedan?
- OBDII code P0345 indicates a problem with the Camshaft Position Sensor Circuit Bank 2 in a 2009 Nissan Altima Sedan.
3. What are the possible causes of OBDII code P0345 in a 2009 Nissan Altima Sedan?
- Possible causes include a faulty camshaft position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).
4. How can the Camshaft Position Sensor Circuit Bank 2 issue be diagnosed in a 2009 Nissan Altima Sedan?
- The issue can be diagnosed using a scan tool to read the OBDII code, performing a visual inspection of the sensor and its wiring, and testing the sensor's voltage and signal.
5. Can driving with OBDII code P0345 in a 2009 Nissan Altima Sedan cause further damage?
- Driving with this code can potentially cause further damage to the engine and may lead to more severe issues if left unaddressed for an extended period.
6. What is the typical repair process for resolving OBDII code P0345 in a 2009 Nissan Altima Sedan?
- The typical repair process involves replacing the faulty camshaft position sensor, repairing any damaged wiring or connectors, and clearing the code from the ECM.
7. Are there any preventive measures to avoid encountering OBDII code P0345 in a 2009 Nissan Altima Sedan?
- Regular maintenance, such as checking and replacing sensors as recommended by the manufacturer, can help prevent issues like OBDII code P0345 from occurring.
8. How much does it cost to repair OBDII code P0345 in a 2009 Nissan Altima Sedan?
- The cost of repair can vary depending on the cause of the issue, but it typically ranges from $100 to $300 for parts and labor.
9. Can a DIY enthusiast fix OBDII code P0345 in a 2009 Nissan Altima Sedan?
- Depending on the level of expertise, a DIY enthusiast may be able to replace the camshaft position sensor and address wiring issues, but it's recommended to consult a professional if unsure.
10. Will resetting the OBDII code P0345 in a 2009 Nissan Altima Sedan make the issue go away permanently?
- Resetting the code may temporarily remove the warning light, but if the underlying issue causing OBDII code P0345 is not fixed, the code is likely to reappear.
Discuss the causes and fixes for P0345 2009 Nissan Altima Sedan OBDII Code
Code P0345 2009 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
