P0344 Honda Code - Camshaft Position Sensor 'A' Circuit Intermittent Interruption
Quick Answer
The Camshaft Position (CMP) Sensor 'A' consists of a rotor and a semiconductor that detects rotor position and intake camshaft timing. Common causes include Faulty Camshaft Position Sensor 'A', Camshaft Position Sensor 'A' harness is open or shorted, Camshaft Position Sensor 'A' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0344 Honda indicates Camshaft Position Sensor 'A' Circuit Intermittent Interruption.
- Common causes
- Common causes include Faulty Camshaft Position Sensor 'A', Camshaft Position Sensor 'A' harness is open or shorted, Camshaft Position Sensor 'A' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0344 Honda Description
What are the Possible Causes of the DTC P0344 Honda?
- Faulty Camshaft Position Sensor 'A'
- Camshaft Position Sensor 'A' harness is open or shorted
- Camshaft Position Sensor 'A' circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0344 Honda?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0344 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0344 Honda code?
Need more information on how to fix the P0344 Honda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0344 Honda code diagnosed by a professional: Find a repair shop in your area
Information for Specific Honda Models
- P0344 2016 Honda CR-V — Camshaft Position Sensor 'A' Circuit Intermittent Interruption
- P0344 2017 Honda CR-V — Camshaft Position Sensor 'A' Circuit Intermittent Interruption
- P0344 2018 Honda CR-V — Camshaft Position Sensor 'A' Circuit Intermittent Interruption
- P0344 2019 Honda CR-V — Camshaft Position Sensor 'A' Circuit Intermittent Interruption
- P0344 2020 Honda CR-V — Camshaft Position Sensor 'A' Circuit Intermittent Interruption
- P0344 2021 Honda CR-V — Camshaft Position Sensor 'A' Circuit Intermittent Interruption
Frequently Asked Questions about P0344 Honda Code
1. What are the common symptoms of OBDII code P0344 in a Honda?
- Common symptoms include engine stalling, rough idle, poor acceleration, and difficulty starting the vehicle.
2. What can cause the OBDII code P0344 to trigger in a Honda?
- The code is typically triggered by a faulty camshaft position sensor, wiring issues, a malfunctioning timing belt, or a problem with the engine control module (ECM).
3. How can I diagnose the OBDII code P0344 in my Honda?
- Diagnosis involves using an OBDII scanner to retrieve the code, inspecting the camshaft position sensor and its wiring for damage, and checking the timing belt for proper alignment.
4. What is the role of the camshaft position sensor in a Honda engine?
- The camshaft position sensor monitors the position of the camshaft to ensure proper timing of fuel injection and ignition, allowing the engine to run smoothly.
5. Can I drive my Honda with the OBDII code P0344 present?
- It is not recommended to drive the vehicle with this code as it can lead to further engine damage and potentially unsafe driving conditions.
6. How can I repair the OBDII code P0344 in my Honda?
- Repair options include replacing the camshaft position sensor, repairing any damaged wiring, adjusting the timing belt, or reprogramming the ECM if necessary.
7. Are there any preventive measures to avoid OBDII code P0344 in a Honda?
- Regular maintenance, such as checking and replacing the timing belt at recommended intervals, can help prevent issues that may trigger this code.
8. Can a DIY enthusiast fix the OBDII code P0344 in a Honda?
- Depending on their skill level and access to tools, a DIY enthusiast may be able to replace the camshaft position sensor or address wiring issues related to this code.
9. How much does it cost to repair the OBDII code P0344 in a Honda?
- Repair costs can vary depending on the specific cause of the code and whether it requires sensor replacement, wiring repairs, or other interventions. Costs may range from $100 to $500 or more.
10. Will resetting the OBDII code P0344 in a Honda make it go away permanently?
- Resetting the code may temporarily clear it, but if the underlying issue is not addressed and repaired, the code is likely to reappear as soon as the problem is detected again.
Discuss the causes and fixes for P0344 Honda OBDII Code
-
hi i have a fault code P0143 on my 09 honda crv diesel but cant find any info
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
