AutoCodes – Dodge – P0341 Dodge

P0341 Dodge Code - Camshaft Position Sensor Circuit Range/Performance

Quick Answer

The Camshaft Position (CMP) Sensor circuits consist of a Powertrain Control Module (PCM) supplied 5-volt reference circuit, a low reference circuit, and an output signal circuit. Common causes include Faulty Camshaft Position (CMP) Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0341 Dodge indicates Camshaft Position Sensor Circuit Range/Performance.
Common causes: Common causes include Faulty Camshaft Position (CMP) Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 22,539

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 12, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0341 Dodge Description

The Camshaft Position (CMP) Sensor circuits consist of a Powertrain Control Module (PCM) supplied 5-volt reference circuit, a low reference circuit, and an output signal circuit. The CMP Sensor is an internally magnetic biased digital output integrated circuit sensing device. The sensor detects magnetic flux changes between the peaks and valleys of a tone wheel attached to the camshaft. As each tooth rotates past the CMP Sensor, the resulting change in the magnetic field is used by the sensor electronics to produce a digital output pulse. The sensor returns a digital ON/OFF DC voltage pulse of varying frequency output pulses per Camshaft revolution that represents an image of the camshaft tone wheel. The frequency of the CMP Sensor output depends on the velocity of the camshaft. The PCM decodes the tooth pattern to identify the camshaft position. This information is then used to sequence the ignition timing and fuel injection events for the engine. The PCM also uses CMP Sensor output information to determine the camshaft relative position to the Crankshaft, to control the CMP Actuator operation if equipped. The Diagnostic Trouble Code (DTC) will set when the PCM does not receive a signal from the CMP Sensor when the Crankshaft Position Sensor indicates engine RPM.

OBDII Code P0341 Dodge - Camshaft Position Sensor Circuit Range/Performance - AutoCodes.com — P0341 Dodge Code - Camshaft Position Sensor Circuit Range/Performance

What does this mean?

What are the Possible Causes of the DTC P0341 Dodge?

Faulty Camshaft Position (CMP) Sensor
Camshaft Position Sensor harness is open or shorted
Camshaft Position Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0341 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0341 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0341 Dodge code?

Need more information on how to fix the P0341 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0341 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0341 Dodge Code

1. What are common symptoms of OBDII code P0341 in a Dodge?

- Common symptoms include rough idling, engine misfires, poor acceleration, and stalling.

2. What does the OBDII code P0341 for a Dodge indicate?

- The code indicates a problem with the camshaft position sensor circuit, specifically related to range or performance issues.

3. What are possible causes of the P0341 code in a Dodge?

- Possible causes include a faulty camshaft position sensor, wiring issues, a bad connection, or a problem with the timing belt or chain.

4. How can I diagnose the cause of the P0341 code in my Dodge?

- You can start by inspecting the camshaft position sensor and its wiring for any damage or corrosion. Using a multimeter to test the sensor's resistance and voltage can help pinpoint the issue.

5. Is it safe to drive my Dodge with the P0341 code present?

- It is not recommended to drive with the P0341 code as it can lead to engine performance issues and potential further damage if left unresolved.

6. Can I reset the OBDII code P0341 in my Dodge without fixing the underlying issue?

- While you can clear the code temporarily, it will likely reappear until the root cause is addressed.

7. How much does it typically cost to repair the P0341 code in a Dodge?

- The cost of repair can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.

8. Should I replace the camshaft position sensor myself to fix the P0341 code in my Dodge?

- If you have experience with automotive repairs and the necessary tools, replacing the camshaft position sensor yourself can be a viable option.

9. Are there any preventive maintenance tips to avoid the P0341 code in my Dodge?

- Regularly inspecting and maintaining the camshaft position sensor, wiring, and timing components can help prevent issues leading to the P0341 code.

10. Can a faulty camshaft position sensor cause other codes to appear in a Dodge?

- Yes, a faulty camshaft position sensor can trigger related codes such as P0340 (Camshaft Position Sensor Circuit Malfunction) or P0344 (Camshaft Position Sensor Circuit Intermittent).