AutoCodes – Nissan – P0340 2011 Nissan Rogue

P0340 2011 Nissan Rogue Code - Camshaft Position Sensor Circuit Bank 1

Quick Answer

The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0340 2011 Nissan Rogue indicates Camshaft Position Sensor Circuit Bank 1 .
Common causes: Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,593

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 22, 2024

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0340 2011 Nissan Rogue Description

The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. This information is used by the Engine Control Module(ECM) to control ignition and fuel injection. The camshaft position sensor senses the retraction of camshaft (intake) to identify a particular cylinder. The camshaft position sensor senses the piston position. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.

OBDII Code P0340 2011 Nissan Rogue - Camshaft Position Sensor Circuit Bank 1 - AutoCodes.com — P0340 2011 Nissan Rogue Code - Camshaft Position Sensor Circuit Bank 1

What does this mean?

What are the Possible Causes of the DTC P0340 2011 Nissan Rogue?

Faulty Camshaft Position Sensor
Camshaft Position Sensor harness is open or shorted
Camshaft Position Sensor circuit poor electrical connection
Faulty starter motor
Starting system circuit
Dead (Weak) battery

How to Fix the DTC P0340 2011 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Sometimes and in some models, low battery voltage or a weak starter can trigger a Camshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0340 2011 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0340 2011 Nissan Rogue code?

Need more information on how to fix the P0340 2011 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0340 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0340 2011 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0340 in a 2011 Nissan Rogue?

- Common symptoms include rough idling, engine stalling, poor acceleration, and difficulty starting the vehicle.

2. What does OBDII code P0340 on a 2011 Nissan Rogue indicate?

- OBDII code P0340 indicates a problem with the camshaft position sensor circuit in Bank 1 of the engine.

3. What are the possible causes of OBDII code P0340 in a 2011 Nissan Rogue?

- Possible causes include a faulty camshaft position sensor, wiring issues, sensor connector problems, or a timing belt/chain issue.

4. How can I diagnose the cause of OBDII code P0340 on my 2011 Nissan Rogue?

- You can diagnose the issue by checking the camshaft position sensor, inspecting the wiring and connectors, and performing a visual inspection of the timing belt or chain.

5. Can I still drive my 2011 Nissan Rogue with OBDII code P0340?

- It is not recommended to drive the vehicle with code P0340 as it can lead to further engine damage and potential safety hazards.

6. How can I repair OBDII code P0340 in my 2011 Nissan Rogue?

- Repair options include replacing the camshaft position sensor, repairing any wiring issues, ensuring proper sensor connections, and addressing any timing belt/chain problems.

7. Will resetting the OBDII code P0340 in my 2011 Nissan Rogue make it go away?

- Resetting the code may temporarily turn off the check engine light, but the underlying issue causing P0340 will persist unless properly diagnosed and repaired.

8. How much does it cost to fix OBDII code P0340 in a 2011 Nissan Rogue?

- The cost of fixing P0340 can vary depending on the exact cause, but it typically ranges from $100 to $300 for parts and labor.

9. Can a DIY enthusiast fix OBDII code P0340 in a 2011 Nissan Rogue?

- If you have the necessary tools and expertise, you may be able to replace the camshaft position sensor yourself, but diagnosing wiring issues or timing problems may require professional assistance.

10. Is OBDII code P0340 a common issue in 2011 Nissan Rogues?

- Yes, P0340 is a relatively common issue in 2011 Nissan Rogues, particularly as the vehicle ages and the camshaft position sensor or related components wear out.