AutoCodes – Ford – P0340 2009 Ford Fusion

P0340 2009 Ford Fusion Code - Camshaft Position Sensor Circuit Bank 1 Sensor 1

Quick Answer

The Camshaft Position (CMP) sensor detects the position of the camshaft. Common causes include Faulty Camshaft Position (CMP) Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0340 2009 Ford Fusion indicates Camshaft Position Sensor Circuit Bank 1 Sensor 1.
Common causes: Common causes include Faulty Camshaft Position (CMP) Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,432

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 29, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0340 2009 Ford Fusion Description

The Camshaft Position (CMP) sensor detects the position of the camshaft. The CMP sensor identifies when piston number 1 is on its compression stroke. A signal is then sent to the Powertrain Control Module (PCM) and used for synchronizing the sequential firing of the fuel injectors. Coil on plug (COP) ignition applications use the CMP signal to select the correct ignition coil to fire. Inline engines with 2 camshafts and with Variable Camshaft Timing (VCT) are equipped with 2 CMP sensors. The second sensor identifies the position of the exhaust camshaft. The Diagnostic Trouble Code (DTC) will set when the Powertrain Control Module can no longer detect the signal from the Camshaft Position (CMP) sensor on bank 1.

OBDII Code P0340 2009 Ford Fusion - Camshaft Position Sensor Circuit Bank 1 Sensor 1 - AutoCodes.com — P0340 2009 Ford Fusion Code - Camshaft Position Sensor Circuit Bank 1 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P0340 2009 Ford Fusion?

Faulty Camshaft Position (CMP) Sensor
Camshaft Position Sensor harness is open or shorted
Camshaft Position Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0340 2009 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0340 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0340 2009 Ford Fusion code?

Need more information on how to fix the P0340 2009 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0340 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0340 2009 Ford Fusion Code

1. What are the common symptoms of OBDII code P0340 in a 2009 Ford Fusion?

- Common symptoms include rough idling, stalling, difficulty starting the engine, poor acceleration, and potential loss of power.

2. What does the OBDII code P0340 for a 2009 Ford Fusion indicate?

- The code P0340 indicates a problem with the camshaft position sensor circuit for Bank 1 Sensor 1 in the vehicle.

3. What are the possible causes of OBDII code P0340 in a 2009 Ford Fusion?

- Possible causes include a faulty camshaft position sensor, damaged wiring or connectors, sensor alignment issues, or engine timing problems.

4. How can I diagnose the cause of OBDII code P0340 in my 2009 Ford Fusion?

- Diagnosing the issue may involve checking the sensor's wiring and connectors for damage, ensuring proper sensor alignment, and testing the sensor's functionality with a multimeter.

5. Can I still drive my 2009 Ford Fusion with OBDII code P0340 present?

- It is not recommended to drive the vehicle with code P0340 present, as it can lead to further engine damage or potential safety hazards.

6. How can I repair OBDII code P0340 in my 2009 Ford Fusion?

- Repairing the issue may involve replacing the camshaft position sensor, repairing damaged wiring or connectors, ensuring proper sensor alignment, and clearing the error code.

7. Will resetting the error code make OBDII code P0340 go away permanently?

- Resetting the error code may temporarily clear the warning light, but the underlying issue causing code P0340 will persist until properly diagnosed and repaired.

8. Can a DIY enthusiast fix OBDII code P0340 in a 2009 Ford Fusion?

- Depending on the DIY enthusiast's skill level and access to tools, diagnosing and repairing code P0340 may be possible, but professional help is recommended for accurate diagnosis and repair.

9. How much does it typically cost to repair OBDII code P0340 in a 2009 Ford Fusion?

- The cost of repairing code P0340 can vary based on the cause of the issue, but it typically ranges from $100 to $300 for parts and labor.

10. Are there any preventative maintenance tips to avoid OBDII code P0340 in a 2009 Ford Fusion?

- Regularly inspecting and maintaining the camshaft position sensor, checking wiring and connectors for damage, and ensuring proper engine timing can help prevent issues leading to code P0340.