AutoCodes – Ford – P0340 2008 Ford Fusion

P0340 2008 Ford Fusion Code - Camshaft Position Sensor Circuit Bank 1 Sensor 1

Quick Answer

The Camshaft Position (CMP) sensor detects the position of the camshaft. Common causes include Faulty Camshaft Position (CMP) Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0340 2008 Ford Fusion indicates Camshaft Position Sensor Circuit Bank 1 Sensor 1.
Common causes: Common causes include Faulty Camshaft Position (CMP) Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 12,224

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 29, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0340 2008 Ford Fusion Description

The Camshaft Position (CMP) sensor detects the position of the camshaft. The CMP sensor identifies when piston number 1 is on its compression stroke. A signal is then sent to the Powertrain Control Module (PCM) and used for synchronizing the sequential firing of the fuel injectors. Coil on plug (COP) ignition applications use the CMP signal to select the correct ignition coil to fire. Inline engines with 2 camshafts and with Variable Camshaft Timing (VCT) are equipped with 2 CMP sensors. The second sensor identifies the position of the exhaust camshaft. The Diagnostic Trouble Code (DTC) will set when the Powertrain Control Module can no longer detect the signal from the Camshaft Position (CMP) sensor on bank 1.

OBDII Code P0340 2008 Ford Fusion - Camshaft Position Sensor Circuit Bank 1 Sensor 1 - AutoCodes.com — P0340 2008 Ford Fusion Code - Camshaft Position Sensor Circuit Bank 1 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P0340 2008 Ford Fusion?

Faulty Camshaft Position (CMP) Sensor
Camshaft Position Sensor harness is open or shorted
Camshaft Position Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0340 2008 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0340 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0340 2008 Ford Fusion code?

Need more information on how to fix the P0340 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0340 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0340 2008 Ford Fusion Code

1. What are the common symptoms of OBDII code P0340 on a 2008 Ford Fusion?

Symptoms may include engine misfires, rough idling, stalling, difficulty starting the vehicle, and a decrease in fuel efficiency.

2. What does the OBDII code P0340 for a 2008 Ford Fusion indicate?

This code specifically points to an issue with the Camshaft Position Sensor Circuit for Bank 1 Sensor 1.

3. What are some possible causes of the P0340 trouble code on a 2008 Ford Fusion?

Potential causes include a faulty camshaft position sensor, damaged wiring or connectors related to the sensor, or issues with the sensor's circuit.

4. How do I diagnose the cause of the P0340 code on my 2008 Ford Fusion?

Diagnosis typically involves checking the camshaft position sensor for proper operation, inspecting the wiring and connectors for damage, and testing the sensor's circuit for continuity.

5. Can I still drive my 2008 Ford Fusion with the P0340 code present?

It is not recommended to drive the vehicle with the P0340 code active, as it can lead to further engine damage or safety hazards.

6. How can I repair the Camshaft Position Sensor Circuit Bank 1 Sensor 1 issue on my 2008 Ford Fusion?

Repair methods may include replacing the camshaft position sensor, repairing or replacing damaged wiring/connectors, or addressing any circuit-related issues.

7. Are there any DIY tips for fixing the P0340 code on a 2008 Ford Fusion?

While some may attempt to replace the camshaft position sensor themselves, it is recommended to consult a professional mechanic for proper diagnosis and repair.

8. Is the Camshaft Position Sensor Circuit Bank 1 Sensor 1 a common problem in 2008 Ford Fusion vehicles?

Yes, issues with the camshaft position sensor circuit are not uncommon in 2008 Ford Fusion models, and may require periodic maintenance.

9. Can a faulty camshaft position sensor cause other engine problems in a 2008 Ford Fusion?

Yes, a faulty camshaft position sensor can lead to a variety of engine issues, including poor performance, misfires, and potential damage to other engine components.

10. Will resetting the OBDII code P0340 on a 2008 Ford Fusion make the problem go away?

Simply resetting the code without addressing the underlying issue will not fix the problem. It is important to diagnose and repair the root cause of the P0340 code for a lasting solution.