AutoCodes – Toyota – P0340 2000 Toyota Camry

P0340 2000 Toyota Camry Code - Camshaft Position Sensor 'A' Circuit Bank 1

Quick Answer

The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0340 2000 Toyota Camry indicates Camshaft Position Sensor 'A' Circuit Bank 1.
Common causes: Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 23,399

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 16, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0340 2000 Toyota Camry Description

The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. This information is used by the Engine Control Module(ECM) to control ignition and fuel injection. The camshaft position sensor senses the retraction of camshaft (intake) to identify a particular cylinder. The camshaft position sensor senses the piston position. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.

OBDII Code P0340 2000 Toyota Camry - Camshaft Position Sensor 'A' Circuit Bank 1 - AutoCodes.com — P0340 2000 Toyota Camry Code - Camshaft Position Sensor 'A' Circuit Bank 1

What does this mean?

What are the Possible Causes of the DTC P0340 2000 Toyota Camry?

Faulty Camshaft Position Sensor
Camshaft Position Sensor harness is open or shorted
Camshaft Position Sensor circuit poor electrical connection
Faulty starter motor
Starting system circuit
Dead (Weak) battery

How to Fix the DTC P0340 2000 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Sometimes and in some models, low battery voltage or a weak starter can trigger a Camshaft Position Sensor code.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0340 2000 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0340 2000 Toyota Camry code?

Need more information on how to fix the P0340 2000 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0340 2000 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0340 2000 Toyota Camry Code

1. What are the common symptoms of OBDII code P0340 on a 2000 Toyota Camry?

- Common symptoms include engine stalling, rough idling, poor acceleration, and difficulty starting the vehicle.

2. What does the OBDII code P0340 indicate on a 2000 Toyota Camry?

- The code P0340 indicates a problem with the camshaft position sensor 'A' circuit in Bank 1 of the engine.

3. What are some possible causes of OBDII code P0340 on a 2000 Toyota Camry?

- Possible causes include a faulty camshaft position sensor, wiring issues, a damaged sensor connector, or a problem with the timing belt.

4. How can I diagnose the cause of OBDII code P0340 on my 2000 Toyota Camry?

- Diagnose the issue by checking the camshaft position sensor and its wiring for any visible damage, testing the sensor's voltage, and ensuring the sensor is properly connected.

5. Can I drive my 2000 Toyota Camry with OBDII code P0340?

- It is not recommended to drive the vehicle with code P0340 as it can lead to further engine damage and potential safety hazards.

6. How do I repair OBDII code P0340 on my 2000 Toyota Camry?

- Repair the issue by replacing the faulty camshaft position sensor, repairing any damaged wiring or connectors, and clearing the error code with an OBDII scanner.

7. Will resetting the error code fix OBDII code P0340 on a 2000 Toyota Camry?

- Resetting the error code may temporarily clear the warning light, but it will not fix the underlying issue causing code P0340.

8. How much does it cost to repair OBDII code P0340 on a 2000 Toyota Camry?

- The cost of repairing code P0340 can vary depending on the cause, but it typically ranges from $100 to $300 for parts and labor.

9. Can a DIY enthusiast fix OBDII code P0340 on a 2000 Toyota Camry?

- Yes, a DIY enthusiast with the necessary tools and knowledge can often diagnose and repair code P0340 themselves by following repair guides and tutorials.

10. Is OBDII code P0340 a common issue in 2000 Toyota Camry vehicles?

- Yes, code P0340 related to the camshaft position sensor circuit is a relatively common issue in 2000 Toyota Camry vehicles and may occur over time due to sensor wear or wiring problems.