P0339 Scion Code - Crankshaft Position Sensor 'A' Circuit Intermittent
Quick Answer
The Crankshaft Position Sensor system consists of a crank angle sensor plate and a pickup coil. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0339 Scion indicates Crankshaft Position Sensor 'A' Circuit Intermittent.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0339 Scion Description
The sensor plate has 34 teeth and is installed on the crankshaft. The pickup coil is made of wound copper wire, an iron core, and a magnet. The crank angle sensor plate rotates and, as each tooth passes by the pickup coil, a pulse signal is created. The pickup coil generates 34 signals per crankshaft revolution. Based on these signals, the Engine Control Module (ECM) calculates the crankshaft position and engine speed. Using these calculations, the fuel injection and ignition timing are controlled. If there is no signal from the crankshaft position sensor despite the crankshaft rotating, the ECM interprets this as a malfunction of the sensor and the Diagnostic Trouble Code (DTC) will be set.
What are the Possible Causes of the DTC P0339 Scion?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damaged
- Starter motor may be faulty
- Dead or weak battery
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0339 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0339 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0339 Scion code?
Need more information on how to fix the P0339 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0339 Scion code diagnosed by a professional: Find a repair shop in your area
Information for Specific Scion Models
- P0339 2005 Scion xB — Crankshaft Position Sensor 'A' Circuit Intermittent
- P0339 2006 Scion xB — Crankshaft Position Sensor 'A' Circuit Intermittent
- P0339 2007 Scion xB — Crankshaft Position Sensor 'A' Circuit Intermittent
Frequently Asked Questions about P0339 Scion Code
No Frequently Asked Questions about P0339 Scion Code found.
Discuss the causes and fixes for P0339 Scion OBDII Code
Code P0339 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
