AutoCodes – Toyota – P0339 2011 Toyota Camry

P0339 2011 Toyota Camry Code - Crankshaft Position Sensor 'A' Circuit Intermittent

Quick Answer

The Crankshaft Position (CKP) sensor system consists of a CKP sensor plate and a pickup coil. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0339 2011 Toyota Camry indicates Crankshaft Position Sensor 'A' Circuit Intermittent.
Common causes: Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,010

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 16, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0339 2011 Toyota Camry Description

The Crankshaft Position (CKP) sensor system consists of a CKP sensor plate and a pickup coil. The sensor plate has teeth and is installed on the crankshaft. The pickup coil is made of wound copper wire, an iron core and magnet. The sensor plate rotates and, as each tooth passes through the pickup coil, a pulse signal is created. The pickup coil generates signals per engine revolution. Based on these signals, the ECM calculates the crankshaft position and engine RPM. Using these calculations, the fuel injection time and ignition timing are controlled.

OBDII Code P0339 2011 Toyota Camry - Crankshaft Position Sensor 'A' Circuit Intermittent - AutoCodes.com — P0339 2011 Toyota Camry Code - Crankshaft Position Sensor 'A' Circuit Intermittent

What does this mean?

What are the Possible Causes of the DTC P0339 2011 Toyota Camry?

Faulty crankshaft position sensor
Crankshaft position sensor harness is open or shorted
Crankshaft position sensor circuit poor electrical connection
Signal plate may be damage
Starter motor may be faulty
Starting system circuit
Dead or weak battery

How to Fix the DTC P0339 2011 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replaced battery.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0339 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0339 2011 Toyota Camry code?

Need more information on how to fix the P0339 2011 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0339 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0339 2011 Toyota Camry Code

1. What does the OBDII code P0339 mean on a 2011 Toyota Camry?

P0339 indicates an intermittent issue with the Crankshaft Position Sensor 'A' circuit, meaning the sensor is not providing a consistent signal to the engine control module (ECM).

2. What are the symptoms of a P0339 code in a 2011 Toyota Camry?

Common symptoms include engine stalling, hard starting, rough idling, poor acceleration, and the Check Engine Light turning on.

3. What causes the P0339 code to appear?

The code can be triggered by a faulty crankshaft position sensor, damaged wiring or connections, a failing ECM, a weak battery, or a malfunctioning starter motor.

4. Can I drive my 2011 Toyota Camry with a P0339 code?

Driving with this code is not recommended, as it can cause engine stalling, which may lead to unsafe driving conditions.

5. How do I fix the P0339 code on my 2011 Toyota Camry?

Repair options include replacing the crankshaft position sensor, repairing damaged wiring or connectors, ensuring the battery is fully charged, and inspecting the starter motor for issues.

6. How much does it cost to fix a P0339 code on a 2011 Toyota Camry?

The cost can vary, but replacing the crankshaft position sensor typically ranges from $150 to $300, including parts and labor.

7. Where is the crankshaft position sensor located on a 2011 Toyota Camry?

The crankshaft position sensor on a 2011 Toyota Camry is usually located near the bottom of the engine, close to the crankshaft pulley.

8. Can a bad battery cause a P0339 code on a 2011 Toyota Camry?

Yes, a weak or failing battery can cause voltage fluctuations, which may lead to an intermittent signal from the crankshaft position sensor and trigger the P0339 code.

9. Will clearing the P0339 code fix the problem?

Clearing the code may turn off the Check Engine Light temporarily, but it wonâ€™t address the underlying issue causing the code to appear.

10. How can I prevent a P0339 code from recurring on my 2011 Toyota Camry?

Regularly maintain your vehicle by checking the wiring and connectors for damage, ensuring the battery is in good condition, and replacing the crankshaft position sensor at the first signs of failure.