P0339 2009 Toyota Camry Code - Crankshaft Position Sensor 'A' Circuit Intermittent
Quick Answer
The Crankshaft Position (CKP) sensor system consists of a CKP sensor plate and a pickup coil. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0339 2009 Toyota Camry indicates Crankshaft Position Sensor 'A' Circuit Intermittent.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0339 2009 Toyota Camry Description
What are the Possible Causes of the DTC P0339 2009 Toyota Camry?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0339 2009 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0339 2009 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0339 2009 Toyota Camry code?
Need more information on how to fix the P0339 2009 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0339 2009 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0339 2009 Toyota Camry Code
1. What does the OBDII code P0339 mean on a 2009 Toyota Camry?
P0339 indicates an intermittent issue with the Crankshaft Position Sensor 'A' circuit, which monitors the crankshaft's position and speed for proper engine timing.
2. What are the common symptoms of code P0339 in a 2009 Toyota Camry?
Symptoms may include difficulty starting the engine, stalling, rough idling, reduced engine performance, or the Check Engine Light illuminating.
3. What causes the P0339 code on a 2009 Toyota Camry?
Common causes include a faulty crankshaft position sensor, damaged wiring or connectors, a loose sensor, a failing reluctor ring, or issues with the Powertrain Control Module (PCM).
4. Can I drive my 2009 Toyota Camry with a P0339 code?
It's not recommended to drive with this code as it can lead to stalling or unsafe driving conditions. Address the issue as soon as possible.
5. How do I diagnose a P0339 code on a 2009 Toyota Camry?
Start by inspecting the crankshaft position sensor and its wiring for damage. Use a multimeter to test the sensor, and check for proper voltage and continuity in the circuit.
6. How much does it cost to fix a P0339 code on a 2009 Toyota Camry?
Repairs may range from $100 to $300, depending on whether the crankshaft position sensor, wiring, or other components need replacement.
7. Can a weak battery cause a P0339 code on my 2009 Toyota Camry?
Yes, a weak or failing battery can cause voltage drops that may result in an intermittent crankshaft position sensor signal and trigger the code.
8. How do I reset the P0339 code on a 2009 Toyota Camry after repairs?
Use an OBDII scanner to clear the code after addressing the issue. If the problem persists, the code may reappear.
9. Can a faulty timing belt cause a P0339 code on a 2009 Toyota Camry?
Yes, if the timing belt is worn or has skipped a tooth, it can disrupt the crankshaft position sensor readings and trigger the code.
10. What happens if I ignore the P0339 code on my 2009 Toyota Camry?
Ignoring this code can lead to worsening engine performance, increased fuel consumption, and potential engine damage over time.
Discuss the causes and fixes for P0339 2009 Toyota Camry OBDII Code
Code P0339 2009 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
