P0339 2005 Scion xB Code - Crankshaft Position Sensor 'A' Circuit Intermittent
Quick Answer
The Crankshaft position sensor also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0339 2005 Scion xB indicates Crankshaft Position Sensor 'A' Circuit Intermittent.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0339 2005 Scion xB Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0339 2005 Scion xB?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0339 2005 Scion xB?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0339 2005 Scion xB code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0339 2005 Scion xB code?
Need more information on how to fix the P0339 2005 Scion xB code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0339 2005 Scion xB code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0339 2005 Scion xB Code
1. What are the common symptoms of OBDII code P0339 in a 2005 Scion xB?
- Common symptoms include rough idle, engine stalling, poor acceleration, and difficulty starting the vehicle.
2. What can cause the OBDII code P0339 in a 2005 Scion xB?
- The code P0339 is typically caused by a faulty crankshaft position sensor, damaged wiring or connectors, or a problem with the sensor's signal.
3. How can I diagnose the OBDII code P0339 in my 2005 Scion xB?
- Diagnosing the code involves checking the crankshaft position sensor for proper operation, inspecting the wiring and connectors for damage, and using a scan tool to monitor sensor data.
4. Can a faulty crankshaft position sensor cause the OBDII code P0339 in a 2005 Scion xB?
- Yes, a faulty crankshaft position sensor can trigger the code P0339 by providing intermittent or incorrect signals to the engine control module.
5. Is it safe to continue driving with the OBDII code P0339 in a 2005 Scion xB?
- It is not recommended to continue driving with the code P0339, as it can lead to engine performance issues and potential stalling, which can be dangerous.
6. How do I repair the OBDII code P0339 in my 2005 Scion xB?
- Repairing the code typically involves replacing the faulty crankshaft position sensor, repairing damaged wiring or connectors, and clearing the error code with a scan tool.
7. Can a DIY enthusiast fix the OBDII code P0339 in a 2005 Scion xB?
- Depending on the individual's skill level and access to tools, a DIY enthusiast may be able to replace the crankshaft position sensor or repair wiring themselves.
8. What is the function of the crankshaft position sensor in a 2005 Scion xB?
- The crankshaft position sensor detects the position of the crankshaft and sends this information to the engine control module to ensure proper ignition timing and fuel delivery.
9. Are there any known recalls or technical service bulletins related to the OBDII code P0339 in a 2005 Scion xB?
- It is recommended to check with your local Scion dealership or online resources for any recalls or technical service bulletins related to the code P0339 in your specific vehicle.
10. How long does it typically take to repair the OBDII code P0339 in a 2005 Scion xB?
- The repair time can vary depending on the exact cause of the issue, but replacing the crankshaft position sensor and clearing the error code usually takes 1-2 hours.
Discuss the causes and fixes for P0339 2005 Scion xB OBDII Code
Code P0339 2005 Scion xB comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
