P0336 Lincoln Code - Crankshaft Position Sensor 'A' Circuit Range/Performance Condition
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0336 Lincoln indicates Crankshaft Position Sensor 'A' Circuit Range/Performance Condition.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0336 Lincoln Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0336 Lincoln?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0336 Lincoln?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0336 Lincoln code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0336 Lincoln code?
Need more information on how to fix the P0336 Lincoln code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0336 Lincoln code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0336 Lincoln Code
What does the OBDII code P0336 mean on a Lincoln?
1. P0336 indicates that the Crankshaft Position Sensor 'A' is reporting a signal that is out of the expected range or has performance issues, which can disrupt engine timing. 2.
What are the common symptoms of the P0336 code on a Lincoln?
Symptoms include engine misfires, reduced power, difficulty starting, stalling, poor fuel economy, and the Check Engine Light being illuminated. 3.
What causes the P0336 code to appear on a Lincoln?
Common causes include a faulty crankshaft position sensor, damaged sensor wiring or connectors, a misaligned or damaged crankshaft reluctor ring, or issues with the engine control module (ECM). 4.
Can I drive my Lincoln with a P0336 code?
Driving with a P0336 code is not recommended, as it can cause stalling, reduced performance, or further engine damage if the issue is not resolved. 5.
How do I diagnose the P0336 code on a Lincoln?
Start by inspecting the crankshaft position sensor, wiring, and connectors for damage. Use a scan tool to read live data and verify the sensor's signal. Check the crankshaft reluctor ring for misalignment or damage. 6.
How do I fix the P0336 code on a Lincoln?
Repairs may involve replacing the crankshaft position sensor, repairing damaged wiring, replacing a faulty reluctor ring, or reprogramming the ECM if necessary. 7.
How much does it cost to fix a P0336 code on a Lincoln?
Repair costs vary but generally range from $150 to $300, depending on whether only the sensor needs replacement or additional components require attention. 8.
Can a weak battery cause a P0336 code on a Lincoln?
Yes, a weak or failing battery can cause voltage issues that may interfere with the crankshaft position sensor’s signal, potentially triggering the P0336 code. 9.
Is it necessary to reset the ECM after fixing a P0336 code on a Lincoln?
Yes, after completing repairs, clearing the code with a scan tool is recommended to ensure the ECM resets and monitors the system for any further issues. 10.
What tools are needed to troubleshoot the P0336 code on a Lincoln?
Tools typically include an OBDII scanner, multimeter, and possibly an oscilloscope to test the crankshaft position sensor's signal and wiring integrity.
Discuss the causes and fixes for P0336 Lincoln OBDII Code
Code P0336 Lincoln comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
