P0336 Acura Code - Crankshaft Position Sensor 'A' Circuit Range/Performance
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor (CKP), Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0336 Acura indicates Crankshaft Position Sensor 'A' Circuit Range/Performance.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor (CKP), Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0336 Acura Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field causes the voltage from the sensor to change.
The Diagnostic Trouble Code (DTC) will be set when the CKP signal is not detected by the Engine Control Module during the first few seconds of engine cranking.
What are the Possible Causes of the DTC P0336 Acura?
- Faulty Crankshaft Position Sensor (CKP)
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
- Signal plate may be damaged
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0336 Acura?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0336 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0336 Acura code?
Need more information on how to fix the P0336 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0336 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0336 Acura Code
1. What are the common symptoms of OBDII code P0336 in an Acura?
- Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, poor acceleration, and potential loss of power.
2. What does the OBDII code P0336 for an Acura indicate?
- The code P0336 indicates a problem with the Crankshaft Position Sensor 'A' Circuit Range/Performance in the Acura's engine.
3. What are the possible causes of OBDII code P0336 in an Acura?
- Possible causes include a faulty crankshaft position sensor, wiring issues in the sensor circuit, sensor alignment problems, or issues with the engine's timing belt or chain.
4. How can I diagnose the cause of OBDII code P0336 in my Acura?
- Diagnosing the issue involves checking the crankshaft position sensor's wiring and connections, inspecting the sensor for damage, and testing the sensor's output using a multimeter.
5. Can I still drive my Acura with OBDII code P0336?
- It is not recommended to drive the vehicle with code P0336 as it can lead to further damage to the engine and potentially cause safety hazards on the road.
6. How can I repair OBDII code P0336 in my Acura?
- Repairing the issue may involve replacing the crankshaft position sensor, repairing any damaged wiring or connections, ensuring proper alignment of the sensor, and clearing the error code from the vehicle's system.
7. Can a DIY enthusiast fix OBDII code P0336 in an Acura?
- Depending on the individual's skill level and access to tools, a DIY enthusiast may be able to replace the crankshaft position sensor or check the wiring. However, complex diagnosis and repairs may require professional assistance.
8. Is it necessary to reset the error code after fixing OBDII code P0336 in an Acura?
- Yes, it is important to clear the error code from the vehicle's system after fixing the issue to ensure the problem has been resolved and to prevent the Check Engine Light from reappearing.
9. How long does it typically take to repair OBDII code P0336 in an Acura?
- The repair time can vary depending on the cause of the issue, the availability of parts, and the individual's experience level. It can take anywhere from a few hours to a full day to complete the repair.
10. Are there any preventive measures to avoid OBDII code P0336 in an Acura?
- Regular maintenance, such as checking the condition of the crankshaft position sensor and ensuring proper engine timing, can help prevent issues that may trigger code P0336 in an Acura.
Discuss the causes and fixes for P0336 Acura OBDII Code
Code P0336 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
