P0336 2015 Chevrolet Silverado Code - Crankshaft Position Sensor Performance
Quick Answer
The crankshaft position sensor is an internally magnetic biased digital output integrated circuit sensing device. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0336 2015 Chevrolet Silverado indicates Crankshaft Position Sensor Performance.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0336 2015 Chevrolet Silverado Description
The ECM also has a dedicated replicated crankshaft position sensor signal output circuit that may be used as an input signal to other modules for monitoring engine RPM.
The Diagnostic Trouble Code (DTC) will be set when the Crankshaft Position Sensor signal is not detected by the ECM during the first few seconds of engine cranking.
What are the Possible Causes of the DTC P0336 2015 Chevrolet Silverado?
- Faulty Crankshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
- Signal plate may be damaged
- Dead or weak battery
How to Fix the DTC P0336 2015 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0336 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0336 2015 Chevrolet Silverado code?
Need more information on how to fix the P0336 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0336 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0336 2015 Chevrolet Silverado Code
What does the OBDII code P0336 mean on a 2015 Chevrolet Silverado?
P0336 indicates an issue with the Crankshaft Position Sensor's performance, which can affect engine timing and spark delivery.
What are the common symptoms of code P0336 in a 2015 Chevrolet Silverado?
Symptoms include difficulty starting the engine, rough idling, stalling, reduced fuel efficiency, and possible activation of the Check Engine Light.
What causes the P0336 code to appear on a 2015 Chevrolet Silverado?
Common causes include a faulty crankshaft position sensor, damaged wiring or connectors, issues with the reluctor ring, or a bad PCM (Powertrain Control Module).
Can driving with code P0336 cause damage to my 2015 Chevrolet Silverado?
Yes, prolonged driving with this code can lead to engine misfires and potential damage to internal engine components.
How can I diagnose code P0336 on a 2015 Chevrolet Silverado?
Start by inspecting the crankshaft position sensor, wiring, and connectors for damage. Use a scan tool to confirm the code and check live data from the sensor.
How do I fix the P0336 code on my 2015 Chevrolet Silverado?
Repairs may include replacing the crankshaft position sensor, repairing damaged wiring, cleaning or replacing the reluctor ring, or updating/replacing the PCM.
Is replacing the crankshaft position sensor expensive for a 2015 Chevrolet Silverado?
The cost varies, but sensor replacement typically ranges from $150 to $300, including parts and labor.
Can a worn-out reluctor ring cause the P0336 code in my 2015 Chevrolet Silverado?
Yes, if the reluctor ring is damaged or misaligned, it can disrupt the crankshaft sensor's signal and trigger the code.
Do I need special tools to fix the P0336 code on a 2015 Chevrolet Silverado?
Basic tools may suffice for replacing the sensor, but a scan tool is necessary for diagnosis and resetting the code.
Can a software update fix the P0336 code on a 2015 Chevrolet Silverado?
In rare cases, a PCM software update may resolve the issue, especially if the problem stems from incorrect sensor calibration.
Discuss the causes and fixes for P0336 2015 Chevrolet Silverado OBDII Code
Code P0336 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
